Product Details

Product Description

Product Application

QY-750 High pressure mortar spraying machine is a screw pump type high-pressure mortar spraying machine, with advanced technology, simple operation and maintenance, it can be operated skillfully without special training. QY-750 High pressure mortar spraying machine adapted spraying material included: putty powder, paint, latex paint, lacquer, cement mortar, dry mortar, thermal insulation, waterproofing materials, fireproof materials, insulation materials, sound-absorbing materials and other water-soluble material.

QY-750 Plunger Pump Cement Mortar Spraying Machine
Power		220v/800W
Flow（m³/h)		3m³/h
The maximum output voltage		0-3MPa
Output voltage of Air Compressor		/
The level capacity of transmission		15m
The vertical capacity of transmission		5m
The maximum aggregate particles		0-2mm
Capacity(L)		15L
Weight(kg)		20kg
Volume size		704085cm

Main Features

1.Basically no ash falls, water, and material, the cost can be reduced more than 20%;
2.Co-mortar operations, such as cement mortar, but also for paint, lacquer, relief effect coatings, waterproofing materials, refractory materials, such as spraying operations, is used for housing protection, paint, paste on the bottom of suitable models
3.Simple operation; speed, high efficiency, low labor intensity
4.Project quality assurance; a multi-purpose machine that can spray mortar, fire protection materials, refractory materials.

5.It carries with an air compressor and a variable frequency electric box..

Spare Parts

1. 1*5m Material Hose;

2. 1*Spraying Gun

3. 1*Full set Nozzles

Applications

The cement spraying machine is mainly used in the building construction industry, both insideand outside wall for plastering and spraying mortar, external wall insulation mortar spraying, the materials can be mortar roughcast, refractory coating, large building spraying fire material, waterproofing coating and so on.

1, In the construction engineering industry, the machine is used for horizontal and vertical transferring and spraying mortar or cement.
2. In the chemical and paper industry, delivering the raw pulp material and waste materials.
3. In coal-fired power plants, the machine is used to deliver the fine coal mortar.
4. In the mining tunnel construction industry, the machine is used to grout and protect slope.
5. In the highway pavement maintenance, it used for road surface collapse pressure mud filling.
6. In Prestressing structure construction, the machine is used for cement road surface collapse pressure mud filling.
7. In water conservancy engineering, it is used for reinforcing the dam.
8. In metallurgy, steel and other industry, the machine is used to maintain the blast furnace and slurry infusion of the other equipment.

Construction Method

1. Before starting, add fresh water into the hopper and regulate the speed to the middle-high speed in order to achieve the effect of wetting pipe, only a short running and then draining the water.
2. Putting the even material stirred into the hopper, and then locking pulp exit of main machine and the pipe & nozzle.
3. Before spraying, filling the pressure of air compressor to 8kg (matched air compressor 0.26-0.36m) and then connected to the nozzle.
4. After connecting to power, putting the gunpoint aiming the hopper, adjusting the air pressure and the speed until achieving the best state of fogging, shutting down the machine but non-stop wind.
5. After the accurate Debug, immediately move the nozzle and spray jets to the construction site work.
6. During the construction process, the pipe is filled with paints, not suitable for parking too long. If the power is failure, you should immediately dismantle the pipe to clean.
7. If filling pressure in the pipe, before dismantling & cleaning, you must put the cloth on it to protect your eyes, avoiding injury.
8. If starting the machine fails, first check whether the fire drills is broken or not and should replace it immediately.
9. Cleaning the body during the working or completion, making sure no wetting the electric drill & box, avoiding damage.
10. After completion of working, must clean up the hoppers, pipes, nozzles, and rotary joints so as to work tomorrow
11. If detecting the exit of coating is weak power after a long time to work, you have to replace the pressure pump.
12. If it suddenly appears without feeding material in the work, while motor is still working, it proves that the nozzle has been plugged. You should immediately stop working and clean the nozzle, and then continue to work.
13. The nozzle is damageable (including the pressure pump). The standard nozzle pore is 4mm. When the fogging of nozzle is not satisfactory, you should immediately replace the nozzle.
14.When manual operate, you should wear a safety helmet, glasses, and protective clothing.

Packing & Delivery

Packaging：Wooden Box
Size	704085cm
Weight	100KG
Packaging Details	The normal package is wooden box(Size: LWH). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Our Service

We value every inquiry sent to us and ensure a quick competitive offer. If you order to us, we can promise the quality.

We put your order into our tight production schedule to ensure you punctual delivery time and send shipping notice to you as soon as your order is shipped. We respect your feedback after you have received the goods.

Because we have more than 10 years of experience in waterproof industry, all our products conform to national standard! We can promise an excellent service and a prompt delivery! Your order is welcome at any time!

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate