Specification

Name:   double action door closer
 Model: DCE-982A

Material: Iron,Cast Iron

Finish: Sprayed Bronze

Door width:800-1100

Door weight(KG):65-85

Function:Two value speed hold open

Introduction

 The model  DCE-982A Series is Stanley’s best performing Heavy Duty Closer. The cylinder body is manufactured using R-14 Silicon Aluminum Alloy providing superior strength and durability on institutional applications. Available in a variety of standard and heavy-duty arm configurations accommodating a broader range of today’s growing architectural application requirements.

Features

Fully Hydraulic Checking

Controls the door through the entire opening and closing cycles by providing adjustable backcheck upon opening and adjusting general and latch speeds through the closing cycle.

(1) opening swing, no checking

(2) backcheck

(3) general speed

(4) latch speed

The DCE-982A Series Door Closers are equiped with a seperate hydraulic valve adjustment to delay the closing speed from 180 to 70 degrees of door opening range.

Non-Handed

Can be used on both RH and LH doors for both push side and pull side mounting.

Adjustable Spring Power

The DCE-982A Series Door Closers are adjustable from size 1 through 6 with more than 50% adjustment over size 6. The  DCE-982A Series Door Closers are adjustable from size 1 through 4 more than 20% adjustment over size 4. The DCE-982A Series Door Closers are designed to meet entrance accessibility requirements of 5LBF opening force or less.

Non-Critical Regulation

The separate adjustments for backcheck, general and latch speeds are equipped with non-critical “V-Slot” regulating valves which allow for fine tuning the closing and latching speeds as well as the backcheck intensity.

All Season Fluid

All season fluid eliminates the need for seasonal adjustment.

Special High Silicon Aluminum Alloy Housing

DCE-982A Series Door Closers are constructed of RYOBI’S R14 HIGH SILICON ALUMINUM ALLOY to exceed the ANSI/BHMA A156.4 Grade 1 requirements.

Metal Cover - Optional

An optional stainless steel, brushed finish metal cover is available.

Maintenance Free

Door Closers mounted in accordance with the provided installation instructions are maintenance free from periodic inspection and adjustment.

Handing

Closing Power Adjustment

DCE-982A * – Size 2 – 6 with 50% with spring power adjustment over size 6. * Meets ADA 5lb opening force

requirements on all applications except Pull-Side Regular Arm Mount. The DCE-982A Series is adjusted to size 3 before leaving the factory. DCE-982A ** – Size 1 – 5 with 35% spring power adjustment over size 5. ** Meets ADA 5lb opening force requirements. The DCE-982A Series is adjusted to size 2 before leaving the factory.

Delayed Action

A delayed action feature is available with this series for all applications and arms. The feature permits the door to close very slowly through the delayed action cycle range. To order add suffix DA to closer number.

Arm Options

Packing

All DCE-982A Series Door Closers with standard arm sets are packed for mounting on standard, parallel arm or top jamb applications. All closer assemblies are packed 6 per carton. Tracks for track mounted closers are packed separately.

Thru Bolts and Sex Nuts

When thru bolting is ordered, factory will furnish sex nuts for use with the machine screws furnished with the closer. Nuts are sized to accommodate 1-3/8” or 1-3/4” thick doors.

DCE-982A closers have been tested and certified to meet the positive pressure criterrion of UL10C & UBC 7.2 (1997)

Track Rail Arm

Forged Main Arm provides high strength with a reduced profile. Non-Handed.

Color

Standard color:sliver/Costomized colors according to your requirement