Product Details

Specifications

Block Ice Machine
1.Quick Freezing
2.Easy to install
3.High efficiency
4.flow stability

Name: Quick Freezing ice block making machine price (5 ton / 24hours)

General Information:

1. Daily capacity: from 1 ton to 100 tons per set/24 hours.

2. Weight of each block ice: 5kg, 10kg, 15kg, 20kg, 25kg, 30kg....50kg...100kg. We also can customize for you.

3. Installation and operation is very easy. We will deliver the machine mainly as three parts to you. All you need to do is to connect the cooling tower with the refrigeration unit and connect refrigeration unit with the brine tank.

4. We will deliver the machine together with manual book which will instruct you how to install the machine and also teach you how to solve the common mistakes to the machines.

5. For our products, we offer you 1 year quality guarantee after the installation of the machine in your factory and lifelong technical support.

Block ice making machine:

NO.	Parameters		Technical data
1	Name		Block Ice Machine of container
2	Model		JJMB5
3	Quantity		1Unit
4	Daily output		5tons/day
5	Weight		3500kg
6	Measurement	Machine	Main machine:1800mm x 750mm x 1500mm
			Salt tank:3200mm×2150mm×1250mm
		Size of Ice Block	300mm×120mm×800mm (25kg) 70pcs/time, 3times/day, total 210pcs 25kg block ice.
7	Noise		55dB
8	Refrigerant		R22
9	Evaporating temp.		-10°C
10	Condenser temp		+40°C
11	Necessary cooling capacity		35.1KW
12	Input water temp.		28°C
13	Ambient temp.		40°C
14	Compressor	Model	Semi-compressor compressor
		Brand name	Bitzer
		Amount	1
		Type	4G-20.2
		Capacity	20HP
15	Total Power of cooling tower		3.75KW
16	Cooling air Volume		500m3/h
17	Cooling water flow		40 m3/h
18	Water consumption		0.08m3/h
19	Power of circulating water pump		3KW
22	Voltage		380V/3Phase/50Hz
23	ice block weight density		900-950kg/m3
24	Power consumption		70KW~80KW/ton

Main machine:

Ice Block :

Ice-making tank:

The component of the machine

The performance parameters of German Bitzer compressor operating bases on European standard

EN12900 and50HZ ,its performance parameters through the European ASERCOM authentication. It is

applicable to HFC and HCFC refrigerants. IDEAL ice making machine mostly chose low-and-medium temperature compressor. As using restore gas cooling way, so when it’s used in the low

temperature condition and use R507a or R404a, in a large application scope may not need additional

cooling device.

Using PTC temperature sensors to control the temperature of motor, and the insulation class of motor

is IP65, therefore the compressor motor protected from it; Using Plating ptfe bearings, which have low friction and best emergency operation characteristics, and using splash lubrication,in this case,

the compressor can supply oil although under the extreme operating condition.

All these design characteristics make sure that the compressor can work over 15 years.

The condenser used by IDEAL own a welding pressure vessel license which Issued by AQSIQ, it

has ISO9001,ISO14001 authentication. Using seamless stainless steel tube as cylinder and using

Threaded tube as internal heat transfer material, therefore it has high heat transmission effectiveness.

Considering the differences of the water quality in different areas, it may deposit inside the heat

transfer tube. So we adopt removable end plate design, which make clean conveniently and make the

condenser keeps excellent heat transfer performance sustaining.

DanfossExpansion valve: