*Introduction of the machines

This production line is composed of these 8 machines above, which are able to produce bamboo toothpick .And the total output is 220,000-2500,000 pieces/8hrs, this production need about 4 person to operate. total volume is about 11cbm

* Machine function

1.sawing machine (bamboo)       

sawed 400mm*160T,used for feeding and cutting bamboo, better length is 1-1.2m

2. Bamboo split machine     

dissection cutter head(9-18heads)total 10,put the finished bamboo into the suit cutter headaccording to the size and polish them into bamboo flakes, width from 20mm to 22mm,speed of feeding is 57m/min

3. fix thick and definitely wide flaker    

put the polished bamboo flakes into this machine and make it to be square and straight every side, width from 18-20 mm, width of flaker is 3-4mm,speed of feeding is 87m/min

4.Small flaker

Put the thick bamboo slice to split again into two thin pieces

5. Bamboo filament shaping machine

molding the diameter of the bamboo filament as your request ,speed of feeding is 87m/min

6. Bamboo filament set-size machine

set uniform length of the stick ,cut the request length as your wish

7.Polishing machine                  

polish the raw stick after set-size

8 .Multi-sharpen machine          

Sharpen the cutter and saw

* Machine  Photo