Specifications

(1)Human-Machine Interface
(2)Operation Safety
(3)Longer life of the Machine

 

1,Feeder using European and American technology assembly, four suction and four sent more suitable for thin paper and corrugated smooth feed at high speeds.

 2,Clearance agencies with high precision fan gear, so that the paper at high speed can still be a smooth and steady pass, while reducing the impact on the whole, improve the life of the machine.

 3 ,die cutting the Ministry of New elbows bar linkage design, to ensure that the cutting pressure of up to 300 tons under the premise of the moving platform is more stable, improve the cutting of the stability and reduce the fill pressure.

 4, swap bodies of new sliding regulations in Taiwan, more suitable for a variety of paper smooth positioning, easy to adjust and reliable.

 5,tooth row imported from Taiwan aviation aluminum, greatly improve the positioning accuracy and life of the tooth row.

 6,Feed the collection of paper used in all primary and secondary sets of interchangeable bodies, fully automatic operation, convenient and simple. To ensure that the machines do not stop downloading. Pull the paper, greatly improving production efficiency.

 7, large colored man-machine interfaces, fault information and troubleshooting methods are displayed on a screen, and truly man-machine communication, me the machine operation easier and humanized.

8,with the upper ,middle and lower frame structure, stretchable frame decorated, it’s more convenient and safer for the waste removing pasts to adjust and load needles. Provided directly by host drive shaft to reduce the transmission processes, so that waster moving is more stable and smooth.

 

 

 

 

HY-1050SE technical specification:
Maximum paper (mm): 1050 * 740	1050 * 740
Minimum paper (mm)	400 * 360
Paper specifications (g / m)	80-1200g
Maximum paper thickness (mm):	≤4
Die cutting up to speed (r / h)	7500
Stripping the highest speed (r / h)	6500
Maximum working pressure (t)	300t
Minimum incision size (mm)	9.5
Maximum die size (mm)	1040 * 730
Cutting precision (mm)	± 0.1
Total power (KW)	19.5
Machine total weight (t)	15
Machine size (M)	5.6 * 4 * 2.3

 

  

Service promise

1,Field service professionals

According to the actual situation, we are committed to the system during the warranty, regardless of fault size, as far as possible to provide on-site service, send an experienced professional and technical to the scene,responsible for on-site engineering design and equipment installation, commissioning and fault diagnosis and troubleshooting.

2,The equipment provided free of charge warranty service

We are committed to provide equipment for our one-year warranty and lifetime follow-up service. During the warranty period for any non-human causes of equipment defects or damage, we are responsible for promptly replace or repair free of charge.

3,Hot links and quick response

 

Upon receipt of failure to repair information , we are committed to arrange shift maintenance engineer to use the most efficient means of transport in the emergency project leader must also reach the field command and coordination. Reported as short as possible from the failure to resume normal operation time. Replacement of spare parts for use down the bad parts, in less than two weeks time to be repaired or replaced, it is good standby

4,Spare parts supply

To ensure the effective implementation of the system warranty repair and maintenance services, minimum of system downtime, any time we reserve a certain number of spare parts and spare parts. During the life of the equipment to ensure that the buyer in two days to buy the necessary equipment, consumables and other accessories.

5,Regular repair and maintenance services

In addition to timely respond to management’s failure to inform your organization, we will also develop repair and maintenance service system regularly

 

If you have any intestering in our product, please feel free to contact me

 

Jessie

skype: jessie.lin746