Specifications

The production line is used for making plant fiber mattress, such as coir fiber, plam or hemp, etc.

 

I.Usage of the  Nonwoven Machinery Coir Fiber Mat  Production Line

The  production line is used for making coir fiber mattress, material such as coir fiber, plam or hemp, jute fiber etc. It is auto operated, from the original coir  fiber to the mats.Coir mats could be widely used to these field: sofa cushion, bed mattress, car mat, soil and water conversation board, etc. It is natural and heathy friendly, durable, good permeability, and it can be cleaned. Meanwhile, the mat made from coir fiber without the phenomonon of delimenation and looseness, it is better than A grade spring mattress.

 

II.Specifications of the Nonwoven Machinery Coir Fiber Mat  Production Line

 

Name	nonwoven machinery coir fiber mat  production line
Model	YL-YZD-PL
Product width	2300mm
Product weight	100~1000g/m2
Production capacity	10000 square meters / 10 hours
Electric power supply required	380V 50HZ(Can be changed)

 

 

III.Advantage of the Nonwoven Machinery Coir Fiber Mat  Production Line

 

 

1	Environmental protection
2	Mould proof
3	Good air permeability
4	Health care
5	Buffer performance
6	Rebound resilience

 

  Processing Procedure:

1. 1.      Coir Fiber Bale Opener

This machine is used on opening and loosening coir fiber in bales, output and transfer to next process.

1. 2.      Coir Fiber Carding Machine

this mahcine used for carding coir fiber, to make the fiber thickness distributed evenly.

1. 3.      Cross Lapper

This machine used for laying the coir fiber which have been distributed well to a certain width and thickness by control inverter, easy operation. Then transfer to next procedure after pressing.

1. 4.      Coir Felt Needle Punching Machine

this machine used for stitching coir fiber felt with needles cyclingly moving up to down.

1. 5.      Glue Sprayer

Two sets glue sprayer applies for spraying latex or other kind of glue evenly onto coir felt which is output from needle punching machine, then convey the coir felt into next procedure.

1. 6.      Oven

This machine must work with boiler which generated by heat oil or natural gas or steam or coal. There are three layer telflon mesh receive the coir felt which has been sprayed. It is cycling heating process from the top layer to the below layer. Heating temperature can up to 100 degree if use steam, temperature can up to 200 degree if you use heating oil. The coir sheet will be transfer next machine—automatic cutting machine

1. 7.      Automatic Cutting Machine

This machine mainly in the later coir mat production line. It will cut the coir sheet edge in width and length which output from oven. To make the coir sheet in a good shape, then we can put the coir sheet onto press machine to get a certain thcikness mat.

1. 8.      Press Machine

This machine mainly used in compressing and shaping both sides of coir sheet. Putting 2-4 pieces coir sheet onto one press plate( there are 5-7 pcs press plate) and pressing to one piece coir mats. If you want thickness more than 10 cm, machine should be install 5 press plates. We will get four pieces coir mats if there are 5 press plates. And getting 6 coir mats if there are 7 press plates.

1. 9.      Trimming Machine

This machine used in the later coir mat production line. We can use it to cut coir mat edge( width and length) which compressed well from pressing machine. Then we get final product coir mats!

  

IV.Trade Information

 

Payment terms	30-50% as deposit by T/T 50-70% as balance paid before delivery L/C
Delivery Time	Approx 20 working days upon receipt of down payment
Package	Naked, wooden case
Warranty	12 month
	.
MOQ	1 set
Export country	Malaysia , Bengal, Russia, Indonesia etc.

 

The seller will send 1-3 engineer to do the installation and commissioning of the line at the request of the buyer. And the buyer should provide round-trip air plane tickets, accommodation, food, and salary.

 

  

 

Establish year	1989
Worker numbers	50-100
Factory Covers	24000 square meters
Equipments	CNC
Sales department	5
QC department	10

 

 

Customers we cooperated:

 

 

 

 

 

 

 

 

 

We are a factory specialized in nonwoven machine manufacturing and our engineers have almost 30 years experience on the nonwoven equipments. We can provide you with qualified products of competitive price. Also,we can offer the best after-sale service for you.

 

If you have any questions about our nonwoven machinery coir fiber mat  production line , pls contact us and we will answer your questions as soon as possibe.