Name: PES pleated filter element for Ultrapure Water offered by china manufacturer
Brand: Manfre
Availability: InStock

Product Details

Specifications

1.PES pleat filter element
2.FDA listed materials
3.Manufacturer at factory price
4.In beverage industry

Manfre Supply PES Pleat Filter Element

---Professional Manufacturer

The polyethersulfone membrane provides high contaminant capacity,
superior flow rates and consistent removal of particles and microorganisms.

The cartridges are highly compatible with the most rigorous sanitizing methods
in the beverage industry. Reliability is further assured with the Manfre integrity
testable design.

Filter Specifications

Dimensions / Parameters

Media
Asymmetric polyethersulfone
membrane

Inner core, end caps, cage
Polypropylene

Support layers
Spunbond Polypropylene

Gaskets/O-Rings
Buna-N, EPDM, Silicone, Viton,
Teflon encapsulated Viton O-Rings

Micron ratings
0.03 µm, 0.1 µm, 0.2 µm,

0.45 µm

Nominal lengths
9.75", 10", 20", 30", 40"

Outside diameter
2.7" (6.9 cm)

Inside diameter
1.0" (2.54 cm)

Surface area
7.6 ft2. (0.7m2) per 10 inch element

Max. sustained operating
temperature
180F (82C) at 20 psid (1.38

bar)
Max. differential pressure
60 psid @ 80F (4.14bar @ 27C)

30 psid @ 160F (2.07 bar @ 71C)

15 psid @ 200F (1.03 bar @ 93C)

Max. reverse differential
pressure
40 psid @ 70F (2.76 bar @ 21C)

Recommended
change-out pressure
35 psid (2.4 bar)

Performance Specifications

Hot DI Water	Filter cartridge will withstand temperatures of 185F (85C) for up to 30 consecutive minutes.
Cleaning/Sanitization	Compatible with most common chemical cleaning, sanitizing and sterilizing agents and with pH range from 1–14. Consult factory for specific compatibility information.
Rinse-Up Volumes	Resistivity rinse-up to 18 M-cm: <30 minutes at a flow of 3 gpm per 10-inch element. Rinse-up to single digit ppb TOC in <120 minutes at a flow of 3 gpm per 10-inch element.
Typical Bacterial Retention Performance	Pore Size	Retention
	0.2 µm:	LRV for B. diminuta ≥ 7.8
	0.45 µm:	LRV for S. marcescens ≥ 8.5
	0.65 µm:	LRV for S. cerevisiae ≥ 11 LRV for L. brevis ≥ 7.6
Integrity Test Specifications Minimum Diffusive Air Flow (per 10-inch cartridge) values for Manfre filters wet with water:	Pore Size	Diffusive Air Flow
	0.03 µm:	≤ 50cc/min @ 45psig (3.1 bar)
	0.1 µm:	≤ 50cc/min @ 40psig (2.8 bar)
	0.2 µm:	≤ 35cc/min @ 30psig (2.1 bar)
	0.45 µm:	≤ 35cc/min @ 20psig (1.4 bar)

Quality Assurance

Manufactured in an ISO Class 7 cleanroom environment

100% flushed with 18 M-cm DI water and integrity tested

Meets USP Class VI Biological Test for Plastics

All materials are FDA listed for food and beverage contact

Repeatably steamable and sanitizable

High retention (LVR>7) of yeast and other spoilage organisms

Pore size, lot and serial number are stamped on each filter
element for identification and traceability