Specifications

EPE-industrial filters
1.Filter media for all applications
2.Achievable oil cleanliness up to ISO 12/8/3 (ISO 4406)
3.Factory

Filter element for EPE-industrial filters

Features

1. Filter media for all applications
2. Made out of glassfibre-paper,filter-paper, wire mesh,nonwovens and metal fibre
3. Achievable oil cleanliness up to ISO 12/8/3 (ISO 4406)
4. Filtration ratio βx= 1000
5. Superior dirt holding capacity using multiple layer technology

6. Filtration grade: 1– 1500 μm
7. Filter area: 10cm2– 4.8 cm2

Construction
Special star pleated filter media that is mounted on a perforated support tube.It is glued with a 2-component adhesive in a longitudinal direction and with metal end-caps.Sealed with O-ring or profile seal.

Filter Element Characteristics

Filtration grade and achievable oil cleanliness code
Besides the direct protection of machine components, the most important target when using an industrial filter is to achieve a given oil cleanliness. This is defined by oil cleanliness codes which classifiy the particle size distribution of the existing contamination.The table at the right side contains recommendations for filter media selection dependent on application and shows typical reachable oil cleanliness codes per ISO 4406 or SAE-AS 4059.