Specifications

1.Pleated Air filter element
2.Uniform pleat distribution
3.Large filter surface in a very small space
4.ISO Certification

Dust collector air filter cartridge

Dust cartridges are used to separate dust from gases. Dusty air or gas

is applied to the outside of the cartridges under pressure and the cleaned

airflow exits at the top.The retained dust can be cleaned off with a rotating

wing by means of a cleaning pulse or compressed air

 

Technical Data

Inner core:  Galvanized steel (standard) or stainless steel V4A

 

End caps: Galvanized steel (standard) or stainless steel V4A

 

Seal: Soft material PUR

 

Filter media: Ti 07 - Electrically conductive polyester fleece with PTFE membrane

 

Length L[mm] :  600

 

Filter surface [m²] :7,5

 

max.volume flow[m³/h] : 750

 

max.operating temperature [°C] :80

 

3.Installation

The dust filter cartridges (diameter: 328 mm) are fastened to the filter

plate on the dirt side by means of a tie rod (tightening torque approx. 15 Nm).

A hole with a diameter of 214 mm must be drilled in the filter plate. Mounting

is facilitated by a centre ring

we have our own factory!

we have professional technial team!

we provide the best service to customer!

if you are interested in our product, please contact us!