Specifications

1.ATLAS air oil separator filter 1202-8040-02
2Advanced production technique
3.High efficiency oil filter
4.ISO TEST

Atlas copco Spin-On filter 1202-8040-02

1. general operating pressure of oil separator filter:0.7~1.0 Mpa

2.Initial differential pressure of oil separator filter:0.15~0.25 bar

3. Oil content of oil separator:3~6ppm

4.Oil mist particles of oil separator:≤0.1μm.

5. Material of oil separator element: ultra-fine glass fiber from USA HV co. and Lydall

6. Fine process of rolling welding, spot welding and the latest two-component glue.

7. Working pressure of oil separator: ≤120°C

8. Service life of oil separator: 3500~5200h

 

Features

Oil content in air is lower than 3ppm

 

 1.High filtration efficiency

 

 2.Low initial pressure drop

 

 3.Low residual oil amount

 

 4.Exquisite Craftsmanship

 

 5.long service life

 

 6.high density glass fiber

 

 7.Low pressure difference

 

Notes:

1. Lubricant level in air oil separator should be adjusted to the specified value, usually at 1/2~2/3 height of the oil endoscope.

 

2. Secondary oil return pipe and element should be selected according to the performance of air compressor and the size of air oil separator cylinder.

 

3. Check valve should be kept unblocked, and exhaust pressure should be adjusted to the specified level.

 

4. Please ensure normal working temperature and pressure maintaining valve normal.

 

5. Air oil separator is suitable for all types of oil such as general lubricants, mineral oil, synthetic oil, semi-synthetic lubricants, etc.