Specifications

1.High output, low energy consumption
2.Low maintenance rate
3.High degree of automation
4.Simple structure

         China top brand fly ash rotary dryer      

 

Application of rotary dryer:

The rotary dryer produced by Henan Taida Machinery is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. It can dry  sawdust ,  palm shell, wood chips, bagasse, straw, vinasse , slag, coal powder,  mining powder,  clay, sand, limestone and so on. Rotating dryer can be used for drying many kinds of materials andwith convenient and reliable operation; therefore, it has been widely used.

 

 

Introduce of rotary dryer:

 

 

 

The rotary dryer is a rotating metal plate rolling round cylinder welded with steel plate. The cylinder is equipped with a tire. The drum by means of tire bearing is supported on the roller. The both sides of the wheel are equipped with a pair of loaded gear wheels to instruct and limit the cylinder to ran along the tilt direction. The cylinder is rotated by means of electric motors, gear box drive gear mechanism. The cylinder has a certain tilt and rotation. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the rotary dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc.The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. The rotary dryer produced by Henan Dingke Mechanical Equipment Co.,Ltd is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.

 

 

Working Principle of rotary dryer :

 

 

 

 

 

 

 

The heat source of the dryer is coming from burning device, with this type of dryer adopting the heat ways of concurrent flow. Thus, the materials should be added from the feeding box and the feeding gutter to the cylinder. Since the dryer is put slantly, some of the materials are flowing to the trailing end under the gravity and the rotary force, other materials are risen by the shoveling plate over and over again to the upper and then being scattered to form an even curtain. Because of the continuous scattering, the content of water in the materials will be dried to achieve to the effect.

 

 

Main features of rotary dryer :

 

  

 

 

 

1. Adopt multiple combination scatter device:Overcome traditional dryer "wind hole" phenomenon, high thermal efficiency, coal consumption reduced about 20%.

 

 

 

2. Apply a variety of combustion furnace: high temperature fluidezed bed, grinding coal powder spraying furnace and artificial add stove.

 

 

 

3.Big and small transmission gears adopt pin column replaceable gear, instead of traditional steel casting gear, saving investment cost, and greatly reduce the repair cost and time.

 

 

 

4.Adopt centralized control system, which can realize large-scale enterprise microcomputer central control management.

 

 

 

FAQ of rotary dryer:

1. What the rotary dryer can be used for ?

 

This dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

 

2. what the rotary dryer consist of?

 

the dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.

 

3. Can I use the coal or gas as the heating source?

 

Yea, you can use coal, gas, electricity, oil and wind power to heat the dryer machine.

 

4. How the rotary dryer to work?

 

The raw material plate is arranged conveniently to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.

 

Training & service:

 

Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide 2-years warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

 

Why chooseTaida Company

 

We are manufacturer in Zhengzhou, which serves as the largest base of Chinese industrial technology, and the busiest container port in the world. The competition in this city is severe, only companies with ending technology, stable workforce, and effective cost management could survive. With 45 years of efforts and innovation,our company is now a leading brand in China.

 

Affordable, high-quality machines. Our highly competitive price relies upon our ability to minimize our costs, of which ourcompetitors don’t.

 

1. We are factory(NOT Dealer)

 

2. We own our factory & Land (NOT Rent)

 

3. Staff reside in factory(Stable Workforce)

 

 

 

Producing high-quality and reliable machines is always our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost, instead we manufacture our machines to supply you the best need.