Main Products: Aluminium material ,Machining parts ,Stamping parts ,Drawing parts ,Fire pits
High quality aluminium 3003 sheet
USD $2.83 - $4.26 /Kilogram
Min.Order:1000 Kilograms
Quick Details View All >
Nanjing Metalli Industrial Co., Limited
Business Type: Trading Company
Nanjing Jiangsu ChinaMain Products: Aluminium material ,Machining parts ,Stamping parts ,Drawing parts ,Fire pitsProduct Details
High quality aluminium 3003 sheet
aluminum 3003
aluminum sheet 3003
3003 h14 aluminum sheet
| 1. Aluminum alloy number | ||||||||||||||
| No. | Aluminum Alloy Number | |||||||||||||
| 1.1 | 3003 | |||||||||||||
| 2. Product size and tolerance | ||||||||||||||
| No. | Specification | Size | Tolerance | |||||||||||
| 2.1 | Length (mm) | 500-6000 | ±2 | |||||||||||
| 2.2 | Width (mm) | 450-1300 | ±1 | |||||||||||
| 2.3 | Thickness (mm) | 0.05-4 | min ±0.005,max ±0.08 | |||||||||||
| 3. Chemical composition for some typical alloys | ||||||||||||||
| No. | Internal Alloy Number | AA number | Chemical Composition (%) | |||||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Zr | Bi | Others | Al | ||||
| Each | Total | |||||||||||||
| 3.1 | 1060 | 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 99.6 | |||
| 3.2 | 1070 | 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | 0.03 | 0.03 | 99.7 | |||
| 3.3 | 1100 | 1100 | 0.95 | 0.05-0.2 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||||
| 3.4 | 3003 | 3003 | 0.6 | 0.7 | 0.05-0.2 | 1-1.5 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.5 | 3005 | 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.25 | Cr 0.1 | 0.05 | 0.15 | RE | ||
| 3.6 | 4004 | 4004 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.7 | 4045 | 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.8 | 4047 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.9 | 4104 | 4104 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05-0.2 | 0.05 | 0.15 | RE | ||
| 3.10 | 4343 | 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.11 | 4343A | 4343A | 6.8-8.2 | 0.6 | 0.1 | 0.1 | 0.02 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.12 | 6060 | 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.15 | 0.1 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.13 | 6061 | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.25 | 0.15 | Cr 0.04-0.35 | 0.05 | 0.5 | RE | |
| 3.14 | 6063 | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | Cr 0.1 | 0.05 | 0.15 | RE | |
| 3.15 | 6A02 | 6A02 | 0.5-1.2 | 0.5 | 0.2-0.6 | 0.1-0.35 | 0.45-0.9 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 3.16 | 7072 | 7072 | 0.7 | 0.1 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | 0.05 | 0.15 | RE | |||
| 3.17 | 8011 | 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.1 | 0.08 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.18 | 4343+1%Zn | 4343+1%Zn | 9.0-11.0 | 0.8 | 0.25 | 0.1 | 0.05 | 0.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.19 | 4045+1%Zn | 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 1.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.20 | 4A13 | 4343Mod | 8.9 | 0.6 | 0.2 | 0.1 | 0.08-0.2 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 4. Mechanical properties for some typical alloys | ||||||||||||||
| No. | Alloy number | Thick. (mm) | Temper | Yield Strength Rp0.2(Mpa). Min | Tensile Strength Rm (Mpa) | Elongation (%) A50,Min | Homogenization treatment | Typical usage | ||||||
| 4.1 | 3003 | 0.08-0.15 | O | 35 | 95-135 | 8 | N | Fins | ||||||
| 4.2 | 3003 | 0.16-0.35 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.3 | 3003 | 0.15-0.3 | H12 | 90 | 120-175 | 0.5 | N | Fins | ||||||
| 4.4 | 3003 | 0.06-0.08 | H14 | 125 | 145-185 | 0.5 | N | Fins | ||||||
| 4.5 | 3003 | 0.081-0.3 | H14 | 125 | 145-200 | 0.5 | N | Fins | ||||||
| 4.6 | 3003 | 0.06-0.16 | H16 | 160 | 165-205 | 0.5 | N | Fins | ||||||
| 4.7 | 3003 | 0.2-0.3 | H24 | 125 | 145-205 | 6 | N | Fins | ||||||
| 4.8 | 3003-1 | 0.35-3.0 | O | 35 | 95-135 | 20 | Y | Plate | ||||||
| 4.9 | 3003-1 | 0.40-3.0 | H14 | 125 | 145-185 | 3 | Y | Plate | ||||||
| 4.10 | 3003-1 | 1.0-3.0 | H24 | 125 | 145-185 | 10 | Y | Plate | ||||||
| 4.11 | 6A02 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.12 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.13 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.14 | 4343 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.15 | 4343 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.16 | 4045 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.17 | 4045 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.18 | 4104 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.19 | 4104 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.20 | 4A13 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.21 | 4A13 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.22 | 4047 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.23 | 4047 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.24 | 3003 | 0.25-0.35 | H24 | 130 | 155-205 | 6 | N | Fins for air cooler | ||||||
| 4.25 | 3003 | 0.1-0.2 | H14 | 125 | 145-185 | 1 | N | Fins | ||||||
| 4.26 | 3003 | 0.1-0.3 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.27 | 3003 | 0.3-0.8 | H14 | 125 | 145-185 | 2 | Y | Plate | ||||||
| 4.28 | 3003 | 0.8-2.5 | H14 | 125 | 145-185 | 4 | Y | Plate | ||||||
| 4.29 | 3003 | 0.5-1.6 | O | 35 | 145-185 | 20 | Y | Plate | ||||||
| 4.30 | 3003-1 | 0.3-1.8 | O | 35 | 95-135 | 20 | Y | Band | ||||||
| 4.31 | 3003-1 | 0.5-4.0 | O | 35 | 95-135 | 25 | Y | Plate | ||||||
| 4.32 | 3005 Mod | 0.25-0.6 | H24 | 150 | 185-235 | 8 | N | Long life tube | ||||||
| 4.33 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.34 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.35 | 3005 | 0.8-4.5 | O | 40 | 80-120 | 20 | Y | Vacuum plate | ||||||
| 4.36 | 3005 | 0.6-4.5 | H22 | 110 | 145-195 | 15 | Y | Vacuum plate | ||||||
| 4.37 | 1100 | 0.2-0.3 | H24 | 90 | 115-155 | 3 | N | Fins for air cooler | ||||||
| 4.38 | 6A02 | 1.0-5.0 | O | ≤85 | ≤150 | 20 | Y/N | Plate | ||||||
| 5. Surface finish and other properties | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 5.1 | Surface finish | a. The material shall bright finish; b. The material shall be from pinholes and tearing | ||||||||||||
| 5.2 | Diagonal Variation | The sheets shall not have any diagonal outs beyond 0.5mm | ||||||||||||
| 5.3 | Bend test | There shall be no sign of cracking or peeling off effect while longitudinal or transverse or close bends of 180 or angular. | ||||||||||||
| 6. Packing,Shipping and others | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 6.1 | Packing | To be packed in wooden crate with polythene cover for water protection | ||||||||||||
| 6.2 | Marking | Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight | ||||||||||||
| 6.3 | Shipping tools | Ship goods by van to departune port then by sea to desitination port | ||||||||||||
| 6.4 | Quantity variation | ±10% variation with order quantity shall be acceptable | ||||||||||||
Nanjing Metalli Industrial Co., Ltd is your one stop source for industrial metal parts, including aluminum material and products, stamping and deep drawing parts, precision machining products as well as other manufacturing solution. We've worked hard to earn our good reputation in the markets, customers around the world trust our products and services we provided. Today we offer the high quality products with competitive prices and excellent services through our sincere attitude, professional capability and quick response. Furthermore we're upgrading continuously not only our systems and facilities but also our suppliers to meet increasing requirements.
Contact us
It begins with us, we can always do better. You are welcome to contact us.
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln