9*3W RGB LED underwater light IP67 led underwater fountain light
USD $74 - $98 /Piece
Min.Order:1 Piece
Features:
1. Super-class high power LED which is encapsulated by high efficiency and latest heat dissipation structure.
2. Waterproof (IP68), Shake-proof, Energy-saving, and Environment-friendly.
3. High luminous efficiency, life-span 50,000 hours
4. Operate low voltage 24VDC
5. Cover and housing are 304# stainless steel (316# is available)
6. Safe, Energy saving.
7. Purity color and more than 16,770,000 kinds of color output
Specification Parameter:
Item No. | Un7X3W | UnRGB7X3W | Un9X3W | UnRGB9X3W |
Rate working voltage (V) | DC24V | |||
Max Power(W) | 18.7W | 21W | 21.5W | 27W |
Control way | RGB underwater light need work with 4-wire and 3-loop controller or multi function RGB controller, single color underwater light does not need work with controller and it can light up directly once connecting with power. | |||
Standard lens | 25°/45° | |||
Light source | 7*3w single color | 7*(3 in 1RGB) | 9*3w single color | 9*(3 in 1RGB) |
Standard length of connection wire | 1.5 meters | |||
IP Rank | IP68 | |||
Net Weight(kg) | 2.77 kg | |||
Shell Material | 304 stainless steel |
External dimension:
Installation Instruction:
The product connection diagram
Method A: Master control by DMX controller
Method B: control by RGB remote controller
control method
RGB underwater light need to work with our DMX controller or 4-wire and 3-loop controller (please refer to the instructions for more information). About the 4-wire and 3-loop controller with remote, you can select 13 patterns. About DMX controller, you can set DMX address for each controller and give signal to lights to achieve brightness of R, G, B. While please note that there is a limit for the driving capacity of controller and the cable. For example, one pc DC 24V 8A controller can drive 192W (24V*8A) underwater lights for the max. While for the 27W RGB underwater light, one pc controller can drive 7pcs at most. If you want to connect more pieces lights, RGB amplifier is necessary.
Power supply
The total power of controller or amplifier multiplying by safety coefficient can get the total power of the power supply for driving the underwater lights. (If the number of power is not common number for output, then you can choose the similar number of power output for the power supply)
Installation Instruction:
Make sure the shell of power supply connect to the earth.
The controller and power supply should work in ventilated and dry environment.
Please confirm that there is no short-circuit for the input and output cables. The inner parts of controller can be burnt once the light be connecting with power with short-circuit.
Marks:
The power must be turned off before installing or taking down the lamp.
Please replace with a new one if the light body is broken.
The underwater light can only be used underwater and the continuous time for lighting outside water can not exceed half an hour.
Warning
Please do not connect power supply when the light is still in a box.
Please do not connect high voltage before the installation, and make sure that the fixture connects the earth.
Change the protection cover completely once it’s broken.
Pay attention to anti-fire, anti-electricity and anti-shake
Certification:
Why Choose GOULY LED Limited ?
Quality Control:
100% of the lamps will be tested and keep lighting for 12 hours to test its quality reliability, Then after it is cool we again test 100% of the lamps to see if it still work well. Each lamp should pass all these QC procedures before shipping to customer.
Order infomation
MOQ: 20pcs
Trade term: EXW / FOB Shenzhen
Delivery time: 3-7 working days for sample order, 7-15 working days for mass order.
Warranty
Two years since the date of purchase.
1. Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period, we will provide free/rework new products
2. If Failure or damage due to incorrect operation, wire connection, or anything other do not follow our instuction, GOULY will provide paid maintance within warranty period.
Trade Terms:
1. Payment term: T/T 100% payment in advance, or for over 10,000USD, TT 30% deposit after order confirmed, the balance after goods ready before shipping . or L/C , or Western Union and Paypal for small amount.
2. Lead time: normally in 5~15 days after deposit received
3. Sample policy: Samples are always availble for each model . Samples can be ready in 3~7 days once payment received .
4. Shipping port: Shenzhen , China
5. Discounts: We offer discount for big quantity.
Delivery detail:
We ship goods by UPS/DHL/FEDEX/TNT express which takes 3~7 days to arrive, or by air cargo which takes about one week to arrive , or by sea which takes about one month to arrive , depending on your actual requirements.
Our services:
1. For all your inquires about us or our products, we will reply you in detail within 24 hours.
2. We own well-tranied and passional sales & after-sale services who can speak fluent Engligh language.
3. We offer OEM services. Can print your own logo on product, can customize the retail box packing and other things.
4. We have very experienced R&D engineers and we have strong ability to do ODM projects.