AM300L-H laboratory stirrer adopts the structure compact series type micro motor driver, suitable for laboratory low to medium and high viscosity of the liquid mixture stirring. This machine consists of driving motor, speed controller and increase torque, etc. Mixing console using high density die casting aluminum alloy for the body, stable operation; Output terminal application variable speed power organization, make the output torque multiplication; Speed controller adopts IC speed detection constant power speed regulation technology, instantly effective compensation because of load change and the power supply voltage fluctuation caused by the speed of change. Running speed according to the experiment set arbitrary, digital display intuitive stirring speed, to ensure that the data collection. Built-in soft starting, automatic overload protection, constant all the compensation.

Technical parameters:

Type: AM300L-H

Rated voltage: AC220V

Rated frequency: 50/60Hz

Input power: 510W

Output power: 300W

Stirring shaft output torque: 196.0 N.cm

Work mode: S1 (continuous)

Operating control mode:Combined control knob

Speed control type: Stepless

Speed adjusting range: 100-1800RPM

Timing control range: 1-1000 min

Speed digital display: x1rpm LED

Speed dynamic detection: YES

Speed memory function: YES

Overload protection function:YES

Stirring shaft fixed way: quick clamp

Clamping torque: 192.0 N.cm

Clamping range: Φ2-13mm

Stirring impeller configuration:Four spiral blades impeller

Stirring capacity : 50-60000ML

Stirring processing viscosity: 100000mPa.S

Allow environment temperature: ≤40℃

Allow relative humidity: ≤80%

Size: 215 * 310 * 720mm

Net Weight: 9.5kg

Gross weight: 11kg

  .The machine within one year from the date of purchase, the problem caused by the quality of the product itself,Our company will be responsible for the warranty.
.As a result of user improper use or artificial damage,Our company does not undertake any responsibility and associated maintenance costs.
.The warranty of the machine must have a warranty.
.The unit to remove the internal structure or removed the company indicated in the instruction manual disassembly of parts will be seen as artificial damage is prohibited.
.The machine more than warranty period, the maintenance fee shall be borne by the users themselves.