New Type Substation Equipment Outdoor Series Reactor

New Type Substation Equipment Outdoor Series Reactor

 Application

1). Our power transformers are especially suitable for installation in draw-out type or fixing type switchgears as well as for power plants, substation, self-consumption transformers, power distribution, transmitter system, earthing system, community power supply system, subway, or those places where small space, fire-control, moisture-proof, are needed. Those up to 10kV can be installed in 650 ~ 1200 mm wide switchgear, up to 20kV in a 1000mm wide switchgear and 35kV in 1400 ~ 1600 mm wide switchgear.

2).Our series reactors are suitable for a power system of 6~10kV.They are connected serially with high voltage parallel capacitor group to depress a wave deformation in the system.

Main Features

1).Low loss, low noise, high operation efficiency
2).High ability of protection against short circuit

3).High mechanical strength  
4).Pre-galvanized steel frame, flame-resistant, against corrosion

5).With outstanding fire-proof capability: the epoxy resin is difficult to flame and self-extinguished. So it won’t lead to the second disasters, such as an explosion.

6).Cast epoxy resin with high dielectric strength 18~22kV/mm in vacuum process

7).Superior in environmental performance: the epoxy resin is very stable, moisture-proof and dust-proof. It enables dry-type power transformers to run with high reliability under abominable environment.

8) With theimpeccable temperature control and indicating system, dry-type power transformers can be maintenance free. And this offers a great reduction of operation cost.

9).With small volume, light and convenient for installation and alignment

10).No need of a separated room

Technical Parameters 

1).System Rated Voltage (kV): 3kV up to 35kV

2).Rated Capacity: up to 1200 kVar

3).Rated Current: up to 4000A

4).Rated Voltage For Capacitor (kV): 6.6√3, 7.2√3, 11√3, 12√3

5).Rated Frequency: 50Hz (60Hz on request)

6).Installation: indoor or outdoor

7).Series Reactor Number for Each Phase: 1

8).Insulation Class: F

 1 New Type Substation Equipment Outdoor Series Reactor is packed with wooden packages, and must always stand up according to the direction mark of the packages (except for the 220kV current transformers, they are always packing and transport by lying down).

2 You must remove the wood plates of the top and obverse when you open the package, and then dismantle the 4 pcs M16 bolts which fix in the frame of the package, lift up the voltage transformer vertically and slowly from the package.

3 The clients must check the packages when they receive the voltage transformers, if a package has been broken, they must open the package to check the product together with the forwarder, note down the process and send to the manufacturer.

Pre-sale Service

Quick response: We promise to quote you the best price within 24h.

 Professional customized design: We have a professional team to meet any of your requirements.

Service During Sale

Any consultation about the production progress, delivery time and other kind of products will be received warmly and timely.

After-sale Service 

Good after-sale service: Any consultation and problem will be received warmly.

18-month warranty: Product can be repaired, returned and exchanged if problem occurs within warranty period.

To serve you better, please furnish the following information when you are willing to choose our product.

Type of Product: power transformer

Rated Primary Voltage:   kV

Rated Secondary Voltage: Kv

Rated Capacity: VA

Rated Frequency: 50Hz/60Hz

Number of phase: single/three

Service Condition: indoor/outdoor

Manufacturing Standard: IEC60076-11:2004

Founded in 1988, Guangdong Sihui Instrument Transformer Works Co., Ltd. are specialized in producing

Power transformer, medium voltage current transformer, medium voltage transformer, capacitor voltage transformer, inductive voltage transformer, high voltage current transformer, matching GIS transformers, low tension current transformer, GIS insulators, isolating switches, earthing switches and electrical components and so on.

We have eight workshops covering an area of 50,000 square meters. More than 400 workers are right here working hard for high quality transformers. Large scale production enable us to meet customers various needs and deliver the goods to the customers shortly and timely.

We attach great importance to the quality, and a  total commitment of quality to our clients is our goal.

  1.  Do you provide products for world renowned companies?

     We are one of the suppliers of ABB Groups and Schneider.

2. What are your main markets?

    Our main markets are Asia, Europe, America and Australia.

New Type Substation Equipment Outdoor Series Reactor