Specifications

PVB clear film can used for builing glass and car glass ,the more competitive price

PVB film

1Appearance
1.1AppearancesAchromatic or slinghtly yellow lucid film With velvet surface that has no scar or crease .
1.2Dotted waste sundries and air buhbles
 ≤0.05Allowed if exist separately
 0.05Not exceeding 8 places per filmNot exceeding 5 places per film
  Making marks Define an extanded 0.5 metar film per place Add one extra meter par place
2Size
2.1Thickness ( mm )0.38±0.020.76±0.02
2.2UniformityHorizontal thickness warp should not exceed 15um at a distance of 25mm; horizontal Ehickness warp Should not exceed 20um at a distance of 50cm.
2.3Length tolerance (m )0-50-2
2.4Width tolerance ( mm )0-20
3Moisture ( % )0.4-0.6
4Extending intansion ( MPa )≥20.0
5Ruplura extending rate (%)≥200
6Fograge (%)<0.4
7Shrinking rate (60/15min) ( % )≤12

qilu PVB interlayer is a macromolecule material molded by polyviny, butyral resin that is plasticized and extruded by plasticity. Our PVB film with excellent light transparency, heat and cold resistance, elasticity, is well-sticking to inorganic glass and the making of laminated safety glass. Usual thickness specification is between 0.2 mm - 2 mm.
qilu PVB interlayer is mainly used in making laminated safety glass. Laminated glass is a special glass which is inserted with PVB film between two layers of common glass, which under high heating temperature and pressure, binds to create a single construction. Because of PVB laminated glass with the function of safety, heat preservation, noise proof, and ultraviolet resistance, etc, it is widely used in areas such as high-rise building and auto. PVB film with special formula is also used in aeroplane, space flight ware, military instrument, solar battery, solar energy acceptor and so on.

No.	Classfication ltems	0.38mm	0.76mm
1	Appearance
1.1	Appearances	Achromatic or slinghtly yellow lucid film With velvet surface that has no scar or crease .
1.2	Dotted waste sundries and air buhbles
	≤0.05	Allowed if exist separately
	0.05	Not exceeding 8 places per film	Not exceeding 5 places per film
		Making marks Define an extanded 0.5 metar film per place Add one extra meter par place
2	Size
2.1	Thickness ( mm )	0.38±0.02	0.76±0.02
2.2	Uniformity	Horizontal thickness warp should not exceed 15um at a distance of 25mm; horizontal Ehickness warp Should not exceed 20um at a distance of 50cm.
2.3	Length tolerance (m )	0-5	0-2
2.4	Width tolerance ( mm )	0-20
3	Moisture ( % )	0.4-0.6
4	Extending intansion ( MPa )	≥20.0
5	Ruplura extending rate (%)	≥200
6	Fograge (%)	<0.4
7	Shrinking rate (60/15min) ( % )	≤12