Specifications

Led Square Downlight
Heatsink:Aluminum , good for heat dissipation.
Lens:High light transmission rate lens,30,45,60are av

Led Square Downlight

Specification:

Model	Power	Input Voltage	LED QTY	1M illuminination(LUX)	Lumens	CRI
HS-LC-1W	1w	AC100-240V	1	300±10%	150±10%LM	80
HS-LC- 3W	3*1w	AC100-240V	3	550±10%	220±10%LM	80
HS-LC-5W	5*1w	AC100-240V	5	900±10%	360±10%LM	80
HS-LC-7W	7*1w	AC100-240V	7	1300±10%LM	450±10%LM	80
HS-LC-9W	9*1w	AC100-240V	9	1500±10%LM	650±10%LM	80
HS-LC-12W	12*1w	AC100-240V	12	1800±10%LM	900±10%LM	80
HS-LC- 3Ws	3*1w	AC100-240V	3	550±10%	220±10%LM	80
HS-LC- 6Ws	3w*2	AC100-240V	6	1100±10%LM	580±10%LM	80
HS-LC- 9Ws	3w*3	AC100-240V	9	1500±10%LM	650±10%LM	80

 

1.Heatsink:Aluminum , good for heat dissipation.

2.Lens:High light transmission rate lens,30°,45°,60°are available .

3.Light Source:Epistar and other light source.

4.Driver:Internal isolated  driver,input voltage AC100-240V, high efficiency η≥80% .

5.Dimmable:Triac dimming style,dimming range 1%-100%,stable dimming,no fickering, no high-frequency, noise., and most of  Triac dimmers are available. 

6.Certification:CE ,FCC,C-TICK, ect.

 

Direction for operation:

1. Confirm the rated voltage before installation to keep the products from damaged.

2.Cut off the power until the installation is finished.

3.Contact us when any problems happened,never open the products for avoiding accident.

4.Basic electronic knowledge and professional indication is needed for installation.

5.The typical temperature for products is -20°C-45°C,bad environment decrease lifetime of the products.
6.Never use it in humid environment.