Product Details

Product Description

Description of SOK2M2208 Motor Driver

SOK2M2208 is a type of 2 phase hybrid stepper motor driver, this driver input voltage is 110-220V AC, suit for current less 8.0A, diameter is 110mm ,130mm. 2 phase hybrid stepper motor. the motor run smoothly. It is widely used in CNC machine, robots, cutting machine, packing machine, plotter, engraving machine and so on.

Characteristics of SOK2M2208 Motor Driver

1.Power input type:110V~230V AC,

2.Output current:0.5 ~8A
3.Mircostepping:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64,1/128,1/256,1/5,1/10,1/25,1/50,1/125,1/250
4. Protect form : Overheated protect, lock automatic half current ,error connect protect
5 Weight: 1700g.
6. Working environment:Temperature-15~40℃ Humidity<90%.

Ambient condition

Ambient condition of SOK2M2208 Motor Driver

1.Temperature: Working temperature -10° ~ 45°， stocking temperature -20° ~ 70°

2.Humidity: Not condensation, no water droplets

3.Gas : Prohibition of combustible gases and conductive dust

Fratures

Features of SOK2M2208 Motor Driver

· Average current control, 2 phase sinusoidal output current drive

· Supply voltage from 110VDC~220VDC

· Opto-isolated signal I/O

· Overvoltage, under voltge, overcurrent, phase short cicult protection

· 16 channels subdivision and automatic idle-current reduction

· 16 channels output phase current setting

· Can drive 2 phase and 4 phase hybrid stepper motor when phase current less than 6.0A

· Mainly for 110mm and 130mm 2 phase stepper motor

Note:

1.When ambient temperature is high or working current over 2.7A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.

2.Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric

3.The fault phase is protected: When the double-phase electrical machinery is connected with driver, users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake.

Our service

Our Company

Certifications

55mm High quality electric Ac Motor

91.8% Response Rate

110mm AC synchronous reduction gear motor

91.8% Response Rate

135mm Single phase acasynchrous motor for barrier gate

91.8% Response Rate