Product Details

Surge Protection Device

1. Single Video Surge Protector CY-BL301

Function & Application

This device CY-BL301 is used to protect video signal systems from the damage caused by overvoltage or static discharge, etc. by lightning strike.

Features

1. Built-in protective semi-conductive components, high through flow rate, low limiting voltage, short response time and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Nominal Voltage UN	5V	Insertion Loss	Less than 0.3dB
Max. Continuous DC Voltage UC	8V	Response time	Less than 1ns
Max. Through Flow Rate	5KA	Impedance	75Ω
Max Speed VS	10M	Interface	BNC
Working Conditions	Temperature Range: -25~+85 Celcius Degree Humidity Range: 5%~95%

2. Surge Protector for Video and Power Supply CY-BL302

Function & Application

CY-BL302 is used to protect the power supply and video devices of AC/DC-powered surveillance cameras from surge damage caused by sudden increase of potential difference between different devices when there is induction lightning strike.

Technical Data

Video Parameters	Working Voltage	8V
	Max.Continuous WorkingVoltage	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Insertion Loss	≤0.3dB
	Response time	25ns
	Impedance	75Ω
	Interface	BNC
Electric Power	Working Voltage	AC24/DC12
	Max.Continuous WorkingVoltage.	40V
	Max.Through Flow Rate	10KA
	Response time	≤1ns
	Interface	terminal(L,N)
Working Environment	Working Temperature	-25°C~75°C
Working Environment	Working Humidity	5%-95% non- condenscending

3. Surge protector for Video, Power and Data CY-BL303

Function & Application

CY-BL303 is used to protect the power supply, video and data devices of AC/DC-powered surveillance cameras from surge damage caused by sudden increase of potential difference between different devices when there is induction lightning strike.

Features

1. Three protected lines, no interference with each other and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Video Parameters	Working Voltage	8V
	Max.Continuous WorkingVoltage	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Insertion Loss	≤0.3dB
	Response time	25ns
	Impedance	75Ω
	Interface	BNC
Electric Power	Working Voltage	AC24/DC12
	Max.Continuous WorkingVoltage.	40V
	Max.Through Flow Rate	10KA
	Response time	≤1ns
	Interface	terminal(L,N)
Data Parameters	Data Type	RS485(Simplex, half-duplex)
	Working Voltage	8V
	Max.Continuous WorkingVoltage.	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Response time	≤1ns
	Interface	terminal (+,-)
Working Environment	Working Temperature	-25°C~75°C
Working Environment	Working Humidity	5%-95% non- condenscending

4. Multi-channel Video Surge Protector

5. Network Surge Protector CY-BL301WL

Function & Application

This device CY-BL301WL is used to protect equipment of Ethernet 10 Base or 100 Bas T (like network Card, Ethernet Switch, HUB, Router, etc.) from the damage caused by overvoltage or static discharge, etc. by lightning strike.

Features

1. High through flow rate, low limiting voltage, short response time and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Nominal Voltage UN	5V	Insertion Loss	Less than 0.5dB
Max. Continuous DC Voltage UC	6.8V	Response time	Less than 1ns
Max. Discharge Current	10KA	Transmission Rate	100Mbps
Nominal Discharge Current	5KA	Interface and Protected Lines	RJ45 (A: 1/2, 3/6 B: 1.2.3.4.5.6.7.8)
Others	Temperature Range: -40~+80 °C Resdual Voltage: <5V

Skype: hmcy_lisa

Trademanager: cn209759123