Duct Auto Line VIII/C cleat & TDF flange duct line/drive cleat duct making line
Negotiable /Set
Min.Order:1 Set
Comifo Duct Manufacture Machine Co., Ltd.
Duct Manufacture Auto Line VI/container duct auto line/TDF flange duct line
HVAC Duct auto line 5/auto line V/duct manufacturing machine
Comifo duct manufacture machine Co.,Ltd HVAC system duct equipments sheet metal processing machine
Heating and Cooling HVAC Duct Manufacturing Machine Auto Line VI/TDF Lock/Flange/Cuting/Folding
Model No. |
Max Coil Width |
Thickness Range |
Speed |
Shearing Tolerance |
Diagonal Tolerance | (L*W*Hmm) Floor Space |
CAL8-1.2x1300 | 1300mm
|
0.4-1.2mm (18-30ga)
|
0-18m/min (0-59FPM) |
±0.5mm |
±0.5mm | 14400*4200*1400 |
CAL8-1.2x1600 | 1600mm
| 14400*4500*1400 |
Features:
l Modular design allows adding a section at a time
l Two sets of twin-motor driven dual-decoilings, selectable coils stand by, maximum capacity of 5-ton per station (optional: up to 10-ton per station)
l Pneumatic controlled straightener and beader
l Punch center holes for cross-tie duct bracing
l Duplex drive cleat forming rollers are available
l Patented Automotion pittsburgh lock former, forms pittsburgh lock and right angle, roll forming and shearing simultaneously, shorten working time, a perfect match to duct auto line
l Duplex TDF flange former, forms TDF flange by double sides
l Optimizes floor space by inline position of machines, guarantees high efficiency
l Accurate PLC control unit, preset available profiles and folding style, notching size, punching size, cutting dimension on touchscreen
Other Specific Features of Comifo Coil Line:
1. Formula Programmed, which insure setting and producing different sizes, different quantities in one time.
2. Coil Draw Back, draw back coil is not needed; Comifo coil line can draw back the coil automatically for further prodution, which saves time and no waste material.
Stations: coil-straightening-beading-punching cross-tie holes-punching square-notching-duplex drive cleat forming-folding -shearing- automotion pittsburgh lock forming-coil conveyer (optional) -duplex TDF flange forming -hydraulic folding
l","sans-serif"'>2.2Cutting blank for GDF irregular duct.
Note:
1. Cut to length or cut blank for plasma cutting machine
2.1 Punching and notching for “C” “S” cleat duct. It can cut different types of notches such as ”L”, “U” and square. It can also cut blank for “C” and “S” cleat flange machine.
2.2 Manufacture TDF flange duct automatically.
2.3 Manufacture C cleat duct automatically.
2.4 Cutting blank for angle iron flange or “Z” shape flange machine. Used with a vertical seaming machine to get a full wrap duct.
3. Cutting blank for TTF/LT mate flange. Used with a vertical seaming machine and mate flange machine to get a full wrap duct.