Alibaba High quality and competitive price machine for make pellet wood woodworking machinery

Introduction of Wooden Pallet Block Making Machine
1.The production line consists of FIVE PARTs which is as follows:  
Crusher,Dryer, Gluing Machine, Press Machine and Saw to cut up the block.
2. The raw material is sawdust, wood shavings, waste wood, used pallet etc.
NOTE: If the raw material size is not very big we do not suggest crushing first.
3. The wood block size can be customized according to your needs.Size range

from 20 mm to 145mm and 90*90mm,100*100mm are the common styles.

Warm prosecution type:PID adjusts the merit accentto press the control

1.Crusher: Raw material can be wood sawdust,wood shavings,wood waste etc. 
if the material is bigger than 5mm, we need to crush the material into 5*5mm for further processing;
2.Dryer: If the material's moisture is above 15%, we need to dry the material before mixing with glue;
3.Gluing machine: 15-18% glu for 100kg raw material, glue water amount 100-120kg/m3.
4.Hot press machine(press the material into wood blocks )

This machine can make the pallet block with hole and without holes . 
5.The size of the wood blocks are as per your request, such as 75*75mm,90*90,90*140,100*100,etc.

 Wood block making machine features:

1. Recycle wood waste, heat treatment or fumigation;
2. High temperature, high pressure can press the material into pallet feet one tim, standard size,

without metal material in the pallets;
3. Pallets can be used in export package, free fumigation, and free quarantine; don't need any test before export;
4. According the the European standard, biodegradability;
5. Good water proff, insect prevention, and protection against termites and do not easy to burn;
6. Strong bearing capacity, no deformation and can be reused;
7. Can be forked from four directions, easy to use the pallets;
8. Can be store in bulk, save room, easy to be transport

Click "Send" ,or you can send me message on whatsapp :+8618539256355.