Product Details

vacuum wood blocks drying machine high efficient dryer equipment

Technical index of vacuum wood blocks drying machine

Note! the following is high frequency vacuum dryer oven, drying kiln simple mode introduction.

Model	GZ-3.0III-DL
Capacity	3.3 CBM
Out Dimension (mm)	L4400xW1716xH1806
Inside dimension (mm)	L3600xW1500xH1500
Timber cart (mm)	L3600xW1500xH1500
Max Length of Wood	3m
High Frequency	6.78MHz
Input Power	15KVA
Oscillation power	10Kw
Vacuum pressure	-0.093MPa
Weight(kg)	4000
Packing	20GP
Kiln Temp	Vacuum kiln Drying temperature: ≤90°C
Moisture	From 90% to 6% ,could be setting as per-request
Drying time	2-7 days
Application	Apply for all hardwood species

vacuum wood blocks drying machine is devided in two parts

1) High frequency generator

2) Vacuum wood dryer oven

Descrption & applicable scope of vacuum wood blocks drying machine

A: High frequency vacuum drying kiln equipment is a relatively small and fast drying equipment

B:Applicable to thick hardwood or wood drying, solves the hardwood or large section of wood drying after deformation and cracking problems, because of its small volume and short cycle drying characteristics, especially suitable for solid wood furniture factory or wood processing manufacturers Wood drying or back late the water drying.

Show Hf vacuum drying machine details

Working principle diagram of vacuum wood blocks drying machine

Using high frequency electric field is used as a heating source, even electric field radiation in the wood, and penetrates the wood directly on the water for heating, and the vacuum water absorption to accelerate water discharge.

The wood/lumber/timber drying process with HF vacuum dryer

vacuum wood blocks drying machine characteristics and advantages:

1: Short drying cycle--- HF kiln dryer greatly reduced drying time It does not require heat conduction, both inside and outside of wood timber is heated at same time;

During the heating process, there is staged temperature difference between inside and outside of wood timber, The vapor pressure difference caused by

this surface and the interior temperature difference makes the interior

moisture to move towards the surface. For this reason, the drying time is

much more shorter than traditional ways.

2: Good drying effect--- the wood is drying under vacuum condition, this will

decrease the drying temperature.

Wood drying at low temperature highly humid environment enable complete

free from cracks & distortions as well as retain its hue & luster.

Under constant evenly heating there is not any cracking or bendind appeared.

The moisture content of wood will be maintain a certain percent steadily after drying by hf kiln.

3: Easy Operation--- HF kiln dryer is fully automatic, you just push the cart loaded with wood into the tank, close the tank, and press the start button.

Operation is automatically performed in accordance to the preset program

4: Energy Saving--- The input power is much lower than other drying machine

5: Cost-Effective--- Low input and high out put.

Packing & shipment

1.Plastic and foam packing, fixed by wood pallet, it is packed in 40 feet container.

2.by sea transport