New Products, buy Hot Sale 5-axis Gantry type CNC machining center on China Suppliers Mobile

Product Details

Product Description

CNC gantry machining center is usually for making medium and large parts, and it is widely used in shipping building industry, wind energy industry, aviation industry, to make some parts like motors, blades, beam, molds and gear box.

Item Model	Unit	TY-SP1502	TY-SP1502B	TY-SP1503	TY-SP1503B
table size(WxL)	mm	1200×2100	1200×2100	1200×3000	1200×3000
X-axis travel	mm			3000
Y-axis travel	mm	1650
Z-axis travel	mm	800
size of machine	mm	1650
spindle nose to table	mm	175~975		115~915
table-T-slot	mm	7-22×150
spindle taper	mm	BT50/Φ190
spindle gear	rpm	highest speed 3000rpm
spindle drive ZF reduction	rpm	highest speed 6000rpm, drive ratio 1:1 ; 4:1
spindle straight transfer	rpm	highest speed 6000rpm
XYZ-axis ball-screw size	mm	6310x5010x5010
X-axis rail size	mm	double“V”slide rail		heavy duty roller rail 55
Y-axis rail size	mm	heavy duty roller liner guide 55MM
Z-axis rail size	mm	rectangle slide rail
X/Y/Z axis rapid feed	m/min	12x20x12		20x20x12
three axis working rapid speed	mm/min	1-8000
positioning accuracy	mm	±0.015
repeat positioning accuracy	mm	±0.003
control system	/	MITSUBISHI/FANUC/SIEMENS
spindle motor	kw	22
X-axis servo-actuator	nm	40
Y-axis servo-actuator	nm	30
Z-axis servo-actuator	nm	30
pneumatic source requirement	Kg/Cm2	6
table load capacity	kgs	5000
power consumption	kva	45
weight(approx)	kgs	29500
We reserve the rights on the designing, colors, specification and termination of use of our products. Changes to these factors will not be notified.
Standard accessaries		Special accessaries
1,full closed guard(without top cover)		1, deep honing Coolant thru tool holder device
2,column postposition carrier		2,CNC rotatry table
3,Double oil hydraulic cylinder balance system		3,Electrical box air-conditioning device
4,Oil-water separator		4,Optical Scale ffedback system
5,Cutting fluid cooling system		5,High pressure coolant thru spindle
6,Double spirals type chip conveyer		6,Cutting fluid automatic system
7,Crawler type chip removal/ debris collector car		7,Automatic tool length measurement systems
8,Working light and daylightlamp		8,Automatic work-piece measurement systems
9,Program end alarm light		9,oil-pressure clamping auto 90°lateral milling head
10,water cannons and air gun for cleaning		10,oil-pressure clamping maunal 90°lateral milling head
11,Rigid tapping		11,lengthening milling head
12,RS232C port		12,gear type milling head
13,Portable hand wheel		13,milling head with five faces
14,Spindle cooling system		14,Erect milling head
15,Electrical box heat exchanger		15,manual Universal milling head
16,foundation pad and balance adjustment pad		16,straight transfer milling head
17,One set of tool and adjustment box		17,ZF speed reducer+straight transfer milling head
18,Operation and maintenance instructions
19,automatic power turn-off device
20,precision check report
21,System Operation and maintenance instructions
22,Outside varying voltage(220/380V)
23,Manual/program spindle debris device
24,Central lubricating system