Our company is a professional firm specialized in the production of high frequency medium heating equipment,which is widely used in the areas of furniture,wood drying,Integrated Wood, scientific wood and bent wood. 

Kiln drying firewood equipment adopts high frequency drying, inside and outside of wood isheated at same time, uniform heating, high speed drying,short time and good quality, which may keep the firewood,olive wood, rubber wood nature color, meanwhile, the firewood,olive wood,rubber wood is aerated under the vacuum environment, non-cracking ,especially applied for the thick and hard precious wood, wet wood.

Three main parts of the drying machine  

1) High frequency generator  

2) Vacuum wood dryer oven

3)Cooling tower

Advantage of kiln drying firewood equipment 

1:Short drying cycle

Drying machine greatly reduced drying time It does not require heat conduction,both inside and outside of firewood, hardwood, lumber is heated at same time;

During the heating process, there is staged temperature difference between inside and outside of firewood, hardwood,lumber,The vapor pressure difference caused by this surface and the interior temperature difference makes the interior moisture to move towards the surface.For this reason, the drying time is much more shorter than traditional ways.

2:Good drying effect

The wood is drying under vacuum condition, this will decrease the drying temperature.Wood drying at low temperature highly humid environment enable complete free from cracks & distortions as well as retain its hue & luster.Under constant evenly heating there is not any cracking or bendind appeared.

The moisture content of wood will be maintain a certain percent steadily after drying by hf kiln.

3:Easy Operation

Dryer is fully automatic,you just push the cart loaded with wood into the tank,close the tank,and press the startbutton. Operation is automatically performed in accordance to the preset program

4: Energy Saving

The input power is much lower than other drying machine

5: Cost-Effective

Low input and high out put.

Technical parameter of kiln drying firewood equipment

The flow chart of kiln drying firewood equipment

Packing:standard and pubic export packing or as the customer' requirement.

Shipping: within 20 days.

Our engineer will install all parts for buyers,the buyer can use it directly when the machine reached. Introduction book inside.

Warranty date: all kinds of kiln drying firewood equipment can be ensured for 1 year. 

Customer service:If there were something wrong during this warranty,engineer could be available tooversea to repair itfreely.

If you have any question about high frequency kiln drying firewood equipment made in China,pls free to contact me.