Product Details

VMC-850 Top quality low cost 4 axis cnc vertical milling machine for sale

Vertical machining center

The vertical machining center is applicable to process small complex parts like plates, mold and box types. This machine is good at milling, boring, drilling, tapping and cutting.

5-axis machining center

5-axis machining center is high-tech, high-precision machining center which is specially used for machining complex curved surfaces, such as large impeller,cams 2D or 3D complex curved surfaces, aviation profiled structure and space air rudder structure. Suitable for precision machinery, aviation, military, scientific research, automobile, and high precision medical equipment, mold and other industries.

Main Features:

1. All main parts adopt high strength cast iron, shock absorption power, good wear resistance; And the stress relieving aging treatment, ensure the machine can maintain the best accurancy for a long time.

2. All the main parts are the 3-D dynamic finite element analysis, more can enhance the stability of high speed cutting.

3. Three axis structures adopt X/Y hard rail, Z line rail design, the guide rail sticky plastic use American chardonnay board sticky plastic. high rigidity, high wear resistance, low noise, low friction characteristics, to ensure the positioning precision and achining error control.

4.The vertical machining center is applicable to process small complex parts like plates, mold and box types. This machine is good at milling, boring, drilling, tapping and cutting.

Product Description

1. what is a cnc machine milling machine?

A vertical milling machine is with its spindle in a vertical orientation, used for tight-tolerance milling, such as fine die and mold work.

Vertical milling machines have a cutting blade that is vertically positioned over a table. The blade points directly down into the surface of the metal that it is going to cut. This cutting blade moves up and down while the table moves below it to position the metal for the cut. This allows different sections of the object to be cut, drilled or carved away by the cutting tool. This is the most common milling machine.

The milling machine is the workhorse of the machine shop. In essence, a vertical mill is like a drill press except it is fitted with sturdy bearings capable of handling side as well as end loads. Normally up to 85% of machining jobs will require a mill rather than a lathe.
The 4th axis of a milling machine is the rotary axis (called the A-axis) provided by an optional rotary table. A mill with a rotary table is a powerful combination. Technically, a mill with a rotary table is the minimum combination of tooling required to reproduce itself: that is, make another mill and rotary table.

The 5thaxis of a milling machine is the tilting rotary table provide by an optional tilting rotary table.

2. What are specifications for cnc machine milling machine ?

Specifications	X/Y/Z AXIS HARD GUIDEWAYS
Item Model	Unit	VMC-850	VMC-860	VMC-1060		VMC-1168
working tale size	mm	500*1000	530*1000	600*1300		650*1300
X/Y/Z travel	mm	800/500/550	800/500/680	1000/600/600		1100/600/750
Distance between spindle end and table	mm	105-655	110-800	180-780		110-860
Distance between spindle center and column guide way	mm	555	575	600		690
Maximum weight of working table	kg	600	600	800		1000
table-T-slot	mm	3-18-150	5-18-100	5-18-120		5-18-120
X/Y/Z axis rapid feed	m/min	20	20	20		18
three axis working rapid speed	mm/min	8000	8000	8000		8000
X.Y.Z axis screw mandrel size	mm	4010	4010	4010		4010
positioning accuracy	mm	±0.005/300	±0.005/300	±0.005/300		±0.005/300
repeat positioning accuracy	mm	±0.003	±0.003	±0.003		±0.003
spindle speed	rpm	8000	8000	8000		8000
spindle taper	mm	BT40/150	BT40/150	BT40/150		BT40/150
control system	/	MISTUBISHI M70VA/SIEMENS 828D BASIC/FANUC0I-MD
torque force of spindle motor	nm/kw	35/7.5	47.7/11		47.7/11		47.7/11
torque force of X.Y.Z motor	nm	13.7-47	13.7-47		20-50		20-50
pneumatic source requirement	Kg/Cm2	6	6		6		6
power consumption	kva	20	18		25		25
machine size	mm	255022002550	255023002600		310026002680		320025002680
machine weight	kg	5000	5800		7800		8500

3. What are the accessories for cnc machine milling machine ?

Standard accessories	Special accessories
Full closed guard	Rotary table
Electrical box heater exchanger	Automatic tool length measurement system
Belt drive	Spindle oil cooler
Cutting coolant unit	Scraps conveyer
Cutting air blowing device	Spindle speed:10000/12000rpm
Axis extend guard	bamboo hat type tool magazine /Circular tool magazine
Operation maintenance Manual	Spindle central water discharge
DNC computer transmission line	voltage stabilizer
3 axis Pretensioned Ball Screws
Warning light of three color
Spindle air blast
Rigid tapping
Program storage
Automatic lubrication system
Horizontal bolts and pads
Explosion-proof work light
Plug type hand wheel
Tool box

4. Accessories partners for cnc machine milling machine ?

Packaging & Shipping

Wooden box, or as per customers' requirements.

Before shipment, machines would be painted with rust-proof oil and packed with water-proof material very carefully.

Wooden cases are made of fumigated material and special ordered according to the sizes of different machines. Suitable for transportation and land.

Our Services

a. Engineers available to customers’ place

b. Free operator training

c. Free maintenance within 1 year

d. Long warranty and technology support

Company Information

Huaian Haoyang Machinery CO., LTD., located in Jiangsu, one of the most developed province of China. We are an industry and combination enterprise with several years’ development. HAOYANG has gained its position of prominence over the years in the field of CNC Machining Center, CNC Lathe Machine, Boring and Milling Machines for large size components. HAOYANG boring and milling machines can be used in the fields like energy, aerospace, shipbuilding, diesel engine, defense, earthmoving and general mechanics.

We have already passed the ISO9001 and CE authentication. The trade part is the agent of CNC machines like boring machine, CNC Milling Machine, CNC lathe, machining centers and so on. They are well known for their strength, construction, durability, low maintenance cost and ease of operation.

We do business with sincerity and honesty, and welcome anyone who wants to establish business relationship with us.

FAQ

Q1: how to buy the machines from your company?

A1: 1) please send your inquiry from the bottom of the page, or please call us directly. 2) We will discuss more details after getting in touch with each other.

3) Then we send you INVOICE with our bank account and you pay the money;

4) We start production as soon as we get the money;

5) We deliver the machine by sea to the port in your country.

Q2: what is your payment term?

A2: we prefer 30% TT as deposit and 70% TT before sending machine.

Q3: what is your warranty for the machine?

A3: The warranty for the machine is 12 month. Warranty claim for parts that are replaced free of charge in the warranty term owning to failure or damage will be honored. However, artificial damage or damage due to force majeure is not covered under warranty.

Q4: Can we visit your factory?

A4: of course! You are the most welcome to visit our factory and check the machines in person. Please let us know your plan before you come, and we will pick you up in the airport or at station.

Q5: Do we need to install the machines?

A5: For small machines like VMC and CNC Lathe, there is no need to install. We will send the machines as whole part. For large machines, like Gantry Milling machines and Boring Milling machines, you need to install the machines, or we will send our engineers to your place for installation, if it is necessary.