1.Brief introduction-industrial wood burner

Industrial wood burner is multi-functional types of biomass pyrolysis for the high-quality heat. It use as heating source can replace coal, electricity, gas to boiler auxiliary equipment and hot air drying equipment. Matching it with various types of boilers have half a ton, a ton, two tons, three tons, four tons ...... and other models.

2.Feature-industrial wood burner

1.The high efficiency and energy saving:

This industrial wood burner use renewable biological energy sources for fuel, equipment and fuel cost is very low, the fuel consumption lower than 30-60% oil (gas) of the operation cost; 

2. High thermal efficiency:

Industrial wood burner use gasification combustion and tangent spin the design with streaming, low temperature section burning and burning rate was above 92%;

3. Stable and reliable:

The fully automatic micro positive pressure operation, do not produce temper and take off fire phenomenon;

4. Low carbon environmental protection:

Dust,low sulfur emissions of nitrogen, carbon dioxide zero emissions, accord with GB13271 carbon requirements;

5. The operation is simple:

Industrial wood burner adopt the automatic feeding,simple operation,small amount,single person can be on duty;

6.High-automation: 

The digital integration controller with the advantages of the auto-ignition,auto-feeding,auto-soot cleaning;

7.Safety:

Advanced auxiliary engine, the appendix and the auto-control equipment.

3.Raw material- industrial wood burner

Biomass pellet: made of straw, wheat straw, corn stalks, corncob,rice husk, peanut shell,cotton shell, cotton straw,rank grass, wood sawdust, wood chips,bark, tree root, tree leaves, wood shavings,bamboo powder ect

4.Application- industrial wood burner

Our industrial wood burner is widely used with steam generator, water boiler, industrial furnace, Burning furnace, Fuse burning furnace, kitchen equipment, dryer machinery, food drying equipment, Pressing equipment, Painting equipment, Highway road building machinery equipment, asphalt heating equipment, pressure die casting machine etc.

5.Technical parameter- industrial wood burner

6.Transport-industrial wood burner

Our company have more than 10 years experience in the field of dryin,heating source,our burner used as rotary dryer heating source have export to many countries,such as America, Canada, Russia, Italy, Brazil, Australia, New Zealand , Uruguay, Bulgaria, Uganda, Philippine, India, Pakistan, Vietnam, Belgium, Indonesia, Nicaragua, Guatemala,Ukraine, Thailand, Malaysia, Nicaragua ect.

1) What's the use life of your industrial wood burner?

our answer: 10 years if you operate obey our operation manual

2)What’s the consumption per hour of your industrial wood burner? 

our  answer: This is comply with the model you choose.

3) How about the ignition system? 

our answer: Automtic system,  diesel & petrol either is ok. 

4) How much time it takes to start the burner? 

our answer: About 10-20 minutes.

5) How much time it takes to install the machine?

our answer: It's easy for our technicians, it depends on the equipment that you need.  

6) How many people it needs to run the burner?

our answer: Only 1

7) Can it work continuous? 

our answer: Yes, it can keep working for 24 hours per day

8) Can it be fed automatic? 

our answer: Yes, we have automatic feeding system.

9) Can it be customizable? 

our answer: Yes, we can produce the burner according to different customer's special requests.

1.Delivery time: in 10 days after prepayment.

2.30% prepayment,the rest 70% before delivery,1 year warranty.

3.Select proper equipment model; make sure goods prepared within delivery time.

4.Pre-check and accept products ahead of delivery.

5. Prepare documents required to help customer clear the customs.

If you have any question about heating source industrial wood burner for sale ,pls contact me as the following information.