Wall Plastering Machine HX-1 small

Application Scope

It is the best choice to trowel the cocrete wall,The brick-concrete wall,the cavity wall,the light brick wall and the baking-free brick wall in the office building,the residential building and the civil house with hard floor in it.It can apply the limestone plaster,the stone powder plaster,the concrete plaster,the foaming sandplaster,the dry powder plaster,the gesso plaster,etc.It can work normally only if the plasterig thickness is not more than 3cm and te plsterig height is not more than 5m.

Desigh for Prot

1,If the trowel is not at the plastering angel,even if you press the starting switch, the machine doesn't start in order to avoid the damage of the trowel.

2,When starting,if the motor turns in the opposite direction,the power will be cut off automatically so as to keep the hoisting cable in good order.Turn the reversing switch for phase commutation,then the motor starts.

3,If the machine is held up while goin down,the power will be cut off automatically to keep the hoisting cable in good order

4,Replace a new one in time when the surface of the hoisting cable is not smooth.In case the cable is braken, the machine will stop when it goes down 20cm at the abnormal speed.

5,All the turning joints and all the fastening screws are stain proofing.All the bearings are sealed in multi-layer.And all theaccessories are made in the best domestic enterprisec.We try hard to build the most useful, efficient and advanced machine in the world.

6,The front part is much heavier than the rear part.Even if the hydraulic device doesn't work suddenly,the machine won't fall backwards.It is safe to use.

Contact details

email:sy07 AT

Skype: gtai

Wechat:1056520285

Trade manager:cn1500109134

QQ:767585328

Tel:+86-319-5232233

long-term partner relationship is our goal!