Product Details

Semi automatic aluminum foil rewinder

u Semi automatic Aluminum Foil Roll Cutting and Rewinding Machine (GS-AF 500)

The fourth generation machine mainly used for cutting soft temper material, such as aluminum foil, Kraft paper and parchment etc.

Ø Complete with CPU 224 Control Panel Board from German Siemens.
Ø With automatic feeding aluminum foil speed control, alignment and adjustment.
Ø Semi automatic core loading, gluing, slitting and rewinding of foil rolls.
Ø Combination of Western & Asian Technologies on complete production and control.
Ø Built in position for Embossing Roller, so do not need another embossing machine for embossing foil.
Ø High productivity and user-friendly
Ø Complete with all safety features
Ø Customized build to respective buyer’s requirement

Ø Main Technical Parameter:

Max. Width of Roll	500 mm(19.69'')
Max. Unwind Roll Diameter	Φ800 mm(Φ23.62'')
Wall thickness of Material	0.09-0.025 mm
Max.Unwind core Diameter of Material	Φ76/Φ152 mm( Φ 2.95''/ Φ 5.90'')
The Core Diameter of finished Product	Φ 25/30/38( Φ 0.98''/ Φ 1.18/1.37'')
The Length of Finished Product	30-600m
Producing Speed	4m/s
Magnetic Powder Braker	25Nm
Magnetic Powder Clutch	12Nm
Total Power	2Kw
Total Weight	500Kg
Dimension(L * W * H)	1500X1200X1160mm
Traction motor	Y1001-4
Asynchronous motot	2.2kw
Squirrel-case motor	P60B 8200
Servo motor	1.5kw
Rotating motor	100YCJ 120-3AP
Speed reduction motor	120w

Ø Structure and operation

1. Decoiling

This part has coupling alignment and horizontal adjustment mechanism, drive each hand-wheel can make the material keep to middle, and the aluminum foil roll parallel to the roller. The stroke of coupling alignment and horizontal adjustment both are ±20mm.

2. Stretch roller

Rolling up to the traction roller, need to set a roller running and some stretch motion in the station, in order to eliminate tension pulsation phenomenon and wrinkling phenomenon when the foil roll opened. That can make the foil flat while the foil into the running station.

3. Foil material traction system

This part is the main power part for foil transporting, drivered by the variable frequency speed regulation induction motor. It uses the chain type running in order to running stable and gapless. Rubber roller use air pressure as the hold-down style.

6.Machine show

Ø Production

Ø Service

Ø Our market and clients

Ø Contact us