Exploration Drilling Rig, buy HGY-2000 spindle wire-line geological core prospecting drilling rig machine on China Suppliers Mobile

Product Details

Specifications

1)Rang of rotation speed is wide and reasonable
2)The lowest speed is 49r/min, so the torque is over than 10KN. M,

Features:
1) Rang of rotation speed is wide and reasonable

2) The lowest speed is 49r/min,so the torque is over than 10KN.M,it’s easy to remove the drillnig accessories and deal with the accident

3)The cluth adopts hydraulic operation

4)The transmission case adopts automobile gearbox with high quality

5)The transfer case adopts synchroniser structure.

6)With good stability,guarantee machining precision.

Use: for geotechnical investigation, exploring, prospecting, water well drilling;
Widely used in the construction of the projects e.g. prospection, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction, geological exploring, large diameter boring pile and small diameter diamond core deep hole drilling, etc.

Model	HGY-2000 Drilling Rig
Drilling depth(m)	2000
Maximum speed spindle(r/min)	1143
Spindle speed(r/min)	Positive rotation rate:(speed is1480r/min)51,73,111,123,157,195,265,290,395,421,530,626,852,1143 Reverse rotation rate:58,124
Spindle stroke(mm)	900
Spindle lifting power max.(KN)	200
Spindle driving force max.(KN)	150
Spindle output torque max.(N.M)	(Power is75kw)9767N.m
Spindle hole diameter(mm)	Φ118
Lifting speed(m/s)	0.44, 0.6, 1.05, 1.66, 2.48, 3.37, 4.52
Lifting capacity(single)max.(KN)	100
Steel wire rope diameter & lenth(mm)	Φ22×120
Movable cylinder stroke(mm)	600±10
Oil pump type	2CB-FE-31-5/31-5EF-L11-3L
Oil pump nominal displacement(ml/r)	50
Oil pump nominal pressure(Mpa)	20
Oil pump nominal rotative velocity(r/min)	1800
Electric motor type	Y280S-4
Electric motor power(kw)	75
Electric motor speed(r/min)	1480
Diesel engine type	4BT3.9-C125
Diesel engine power(kw)	93
Diesel engine speed(r/min)	2200
Weight(power unit excepted(kg))	5000
Overall size(LWH) (mm)	370012702500

Packaging & Shipping

Production

Matching Drill Tools

Drill tools for geolgocial core prospecting drilling

FAQ

Q:Rig using common sense?

Answer:

(1) class maintenance:

The outer surface of the drill is wiped clean, and pay attention to the rig substructure slideway, vertical surface cleaning and good lubrication.

The examination of all open bolt, nut, insurance and other solid and reliable.
According to the lubrication requirements of the lubricating oil or grease, see Figure two and table a.
The check gearbox, gear box and the hydraulic system the location of oil tank.
The check around the oil leakage and as the condition to be treated.
The elimination in the class occurred within the other fault.

(2) peripheral maintenance:
The complete class maintenance programs required.
The removal of chuck and slips on the tooth surface dirt, mud.
The clean the inner surface of the brake oil, mud.
The excluded from this week 's fault.

(3) month maintenance:
The complete class, weekly maintenance programs required.
The disconnect chuck, cleaning slips and slips seat. Should be replaced if damaged.
The cleaning tank filter, replacement of deterioration or soiled by hydraulic oil.
The examination of the major components of the intact state, should be replaced if damaged, can not be wounded the work.
The complete elimination of the fault occurred in the month.
And if the drill does not use for a long time, the display part (especially the processing table. ) should becoated with grease.