drilling equipment, buy HGY-200 vertical spindle core drill rig on China Suppliers Mobile

Product Details

Specifications

1,Max depth:200m with 75mm(46~250mm)
2,Two patents
3,Hydraulic or ball chuck
4,Angle: 0-360.

Drilling Rig(HGY-200)
1,Max depth:200m with 75mm(46~250mm)
2,Two patents
3,Hydraulic or ball chuck
4,Angle: 0-360.

Brief introduction:
1.50 years professional manufacture
2. Certificate: ISO9001:2008
3. Export to: Africa, the Middle East, South America, Asia,
Countries: South Africa, Zambia, Sudan, Iran, South Korea, Costa Rica etc.

Two patents for HGY-200 drilling rig:
Utility patent for transmission case.
Design patent for appearance.

Drilling Ability:
Drilling depth: 200m
Drill hole diameter: 75mm(46~250mm)
Max successful drilling depth: 427m, 478m with 75mm hole diameter

Features:
1) Good stability and high reliability.
2) Multilevel positive and reverse rotate speed.
3) The complete hydraulic chuck and vertical spindle.
4) Convenient to transport with the small volume and light weight.
5 )Perfect frame's rigidity ,low center of gravity and good stability.

Technological Data of Drilling Rigs:

Model	Drilling Rig(HGY-200)
Drilling depth( m)	200
Drilling rod diameter.(mm)	Φ50
Head angle range	360
Movable cylinder stroke (mm)	360
Spindle speed( r/min)	Positive rotation rate:60 150 240 340 550 830 Reverse rotation rate: 35 85 135 195 330 480
Spindle hole diameter( mm)	Φ65
Spindle output torque max(N.M)	2140
Spindle stroke(mm)	500
Lifting power max( KN)	50
Driving force max(KN)	37
Lifting speed( m/s)	0.6 2.3 3.4
Lifting capacity(single) max(KN)	20
Steel wire rope diameter (mm)	11
Mode of chuck	Full-hydraulic chuck or ball-type chuck
Weight(power unit excepted)(Kg)	750
Overall dimensions(mm)	18608001400
Diesel engine model	Zs1110 ( 14.7KW)
Electromotor model	Y160L-4 ( 15KW)

Use: for geotechnical investigation, exploring, prospecting, water well drilling;
Widely used in the construction of the projects e.g. prospection, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction, geological exploring, large diameter boring pile and small diameter diamond core deep hole drilling, etc.

Packaging & Shipping

Production

Working Pictures

FAQ

Q:Rig using common sense?

Answer:

(1) class maintenance:

The outer surface of the drill is wiped clean, and pay attention to the rig substructure slideway, vertical surface cleaning and good lubrication.

The examination of all open bolt, nut, insurance and other solid and reliable.
According to the lubrication requirements of the lubricating oil or grease, see Figure two and table a.
The check gearbox, gear box and the hydraulic system the location of oil tank.
The check around the oil leakage and as the condition to be treated.
The elimination in the class occurred within the other fault.

(2) peripheral maintenance:
The complete class maintenance programs required.
The removal of chuck and slips on the tooth surface dirt, mud.
The clean the inner surface of the brake oil, mud.
The excluded from this week 's fault.

(3) month maintenance:
The complete class, weekly maintenance programs required.
The disconnect chuck, cleaning slips and slips seat. Should be replaced if damaged.
The cleaning tank filter, replacement of deterioration or soiled by hydraulic oil.
The examination of the major components of the intact state, should be replaced if damaged, can not be wounded the work.
The complete elimination of the fault occurred in the month.
And if the drill does not use for a long time, the display part (especially the processing table. ) should becoated with grease.