assemble the 6.5m diesel small passenger bus in Nigeria - the 6650 model series:

1. diesel engine --  YC4F115-30 - 2.659L;   

2. front mounted engine, rear wheel drive;   

3. manual transmission;  

4. 19+1 seats, can take as many as 38 passengers including the standing persons.

"assemble the 6.5m diesel small passenger bus in Nigeria" has many advantages, such as:  to save customs duty;   to save freight;   it is easy to start;    the assembling operation is very simple, from SKD to CKD much easier

assemble the 6.5m diesel small passenger bus in Nigeria

Description of the "assemble the 6.5m diesel small passenger bus in Nigeria"---

Technical details of this 6.5m diesel small passenger bus will be assembled in Nigeria

---Basic Parameter Datas of the 6.5m diesel small passenger bus in Nigeria - 6650 model series:

---Other Configurations of the 6.5m diesel small passenger bus will be assembled in Nigeria (can be adjusted according to different clients' requirements if it is reasonable and can be done):

Pictures of this "6650 series model 6.5m diesel small passenger bus" will be assembled in Nigeria:

Our "6650 series model 6.5m diesel small passenger bus" painted in yellow color, the same as the small passenger bus in local Nigerian market:

--- the "6650 series model 6.5m diesel small passenger bus" in other different colors - blue, red, white, orange, etc.:

--- interior and exterior of the 6650 series model 6.5m diesel small passenger bus for our Nigerian partner:

-- Driving Cab of the 6650 series model 6.5m diesel small passenger bus (both Left Hand Drive Steering and Right Hand Drive Steering are available):

-- Plastic Seats of the 6650 series model 6.5m diesel small passenger bus (with two doors - front & rear):

Brief Introduction of this 6650 series mdoel small passenger bus assembly line project in Nigeria (also suitable for other countries, in which the customs duty difference between CBU and SKD / CKD shall be big, let's say, at least 30% or so):

1) save customs duty, this is the most important factor, usually, in most of the countries, the customs duty rate for the KD parts (knocked down auto parts) is much less than the rate for the complete vehicle, the government wants to protect or develop their own industry, for example, in Nigeria, the tax rate on CBU (complete vehicle) is 35%, while only 5% for SKD, and zero percentage for CKD, this is a very good policy;

2) save other taxes in your country for importing such a vehicle, for example, to exept the VAT for 10 years, etc.;

3) save shipping cost, for promote this 6650 series model small passenger bus assembly line project to the world, we have been thinking out one way to save the shipping cost, why? as we all know, this small passenger bus is 6.5 meters long, 2.75 meters high, and 2.2 meters wide, one 40HQ container can only load 1 unit, or we can only use RORO ship (however, some places, RORO ship is not available), thus, the shipping cost for one unit is really a large amount, after discussion among our Technical Department, it is suggested to cut the front part of the small passenger bus (that is, the front "nose" part, which is not load-bearing), but with a small passenger bus shell welded, disassembling the chassis, inner trim, tyre, bumper... after calculation, if with large quantity, the average loading quantity is 1.8 units or 2 units without engine per 40HQ container. The engine and chassis, tyre... can be loaded together in one single container. For our Nigerian partner, in this way, the shipping cost will be reduced by that amount for one complete small passenger bus to Nigeria on average, so it will be a big amount that can be saved.  With this disassembled parts and loading programme, you can reduce not only customs duty but also shipping cost.

So it is much easier and simpler to start this 6650 series model small passenger bus assembly line project from SKD smal passenger bus to CKD small passenger bus and other CKD longer buses.

4) Earn your own Intangible Assets: with the bus assembly project, you can have and develop your own auto brand, logo and also enlarge / exapand to the neighboring countries by using the preferencial tariff policy among your communities.

5) however, to start the bus assembly line project, it is a public project, not private, so you have to find partners who has good connection with the local government, and prepare enough working capital with your local bankers and other financial organizations, and the most important you have to get orders from your government.

What kind of partners we are looking for?

1) Investment Power Requirement: over 1 million USD;

2) Land & Workshop Requirement: over 15000-20000 square meters land including 5000 square meter workshop at least;

3) Software Requirements: Good Automobile Sales Channel, Familiar with Automobile Industry and Its Business;

4) Hardware Requirements on the Import Tariff: the difference gap between auto spare part CKD (completely knocked down) and CBU (complete built unit) shall be at least 30-35%, for example, import tariff on CBU is 35%, it must be 5% or zero on CKD.

-- Bus Factory Workshops (one complete bus assembly line):

-- Bus Manufacturing Procedures (One complete bus assembly line):

What about After-Sales Service?

We propose and provide "REPAIR & MAINTENANCE" After-Sales Service:

1) Found a professional bus "Repair & Maintenance" service company to ensure the After-Sales Service; 

2) Bus spare parts supply;

3) Driving & repairing training guidance;

4) Technical advisory and training;

5) Market data feedback and disposing;

6) The most important - Technology Support.

Brief Introduction of our "China Big Group Company":

1. Our company is focusing on the the vehicle assembling project throughout the world, so far, we have successfully set up several such auto assembling plants in Syria, Ghana, Seychelles, Vanuatu for pickup, SUV, mini bus, and mini moke assembling. Anyone who is interested, contact us freely, looking forward to your cooperation.

2. Our main products:

1) Pickup (Single & Double Cabin; Gasoline & Diesel Engine; 4x2 & 4x4 drive; LHD & RHD);

2) SUV (off-road vehicle: 5 / 7 seats; Gasoline & Diesel Engine; 4x2 & 4x4 drive; LHD & RHD);

3) Van (7-8 seats, 9-15 seats, Gasoline & Diesel Engine; 4x2 drive; LHD & RHD);

4) Mini Moke (Gasoline & Electric, 4x2 drive, LHD & RHD);

5) Bus (Mini Bus, Middle bus, City Bus, and Long-Distance Bus);

6) Providing the assembling equipments and assembing technology of the above mentioned automobiles (pickup, SUV, Van, Moke and Bus) as well as the complete SKD/CKD parts.

Looking forward to your cooperation !!

Our Contact:  

               Lucky Peng (Ms.)

               E: yingqingpeng at china-big dot com dot cn

               Skype: chongqingbig

               Tel: 0086-023-67635049-606

               Whatsapp/ Viber/ Wechat: 0086-15223551381