Lathe Machines, buy Roll Turning Lathe on China Suppliers Mobile

Product Details

Specifications

1. Quality assured
2. Timely delivery
3. Good After sales sevice

SPECIFICATIONS

CAPACITY
ADMIT BEETWEN CENTER	2000 3000 4000MM	2000 3000 4000MM	3000 4000 5000MM	2000 3000 4000 5000MM	3000 4000 5000 6000MM	5000 6000 7000 8000MM
BED WIDTH	500	600	660	760	900	1050
CENTER HEIGHT	450	500	600	700	800	925
SWING OVER BED	900	1000	1200	1400	1600	1850
SWING OVER CARRIAGE	500	650	800	850	900	1200
SWING OVER CROSS SADOLE	450	600	800	850	1150	1350
SWING IN GAP	1250	1300	1400	1650	1950	2200
SWING IN FRONT OF FACE PLATE	225	250	250	250	250	250

HADE SToCK
MAIN SPINOLE BORE	100	100	105	105	105	125
MAIN SPINOLE NOSE	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED
MAIN SPINOLE	MT-4	MT-5	MT-5	MT-5	MT-5	MT-5
NO OF SPEEDS	18	18	18	18	18	18
SPEED RANGE	15 To 450 RPM	10 To 300 RPM	8 To 250 RPM	8 To 200 RPM	4 To 100 RPM	2 To 50 RPM

TAIL SToCK
TAIL SToCK QUILL DLA	90 MM	100 MM	110 MM	125 MM	150 MM	150 MM
TAIL SToCK QUILL TRAVEL	250 MM	300 MM	300 MM	300 MM	350 MM	350 MM
TAIL SToCK QUILL TAPER	MT-4	MT-4	MT-5	MT-6	MT-6	MT-6

SLIDE & CARRIAGE
CROSS SLIDE TRAVEL	450 MM	500 MM	600 MM	725 MM	850 MM	1000 MM
ToP SLIDE TRAVEL	200 MM	200 MM	250 MM	250 MM	250 MM	250 MM
MAX ToOL DEMESNSES	35 x 35 MM	40 x 40	40 x 40	40 x 40	45 x 45	50 x 50

STEADIES
MAX MIN CAP OF FIX STEADY	50 To 400	100 To 500	100 To 550	150 To 650	150 To 750	300 To 900
MAX MIN TRAEVLLING STEADY	20 To 100	20 To 100	20 To 100	20 To 100	20 To 100	20 To 100

MOTOER
MAIN MOToR KW	37 KW	55 KW	55 KW	7.5 KW	11 KW	11KW
OPITIONAL RAPID MOToER FOR SADDLE	15 KW	15 KW	15 KW	15 KW	15 KW	15 KW
COOLANT PUMP MOTOER	0.11 KW	0.11 KW	0.11 KW	0.11 KW	0.11 KW	0.11 KW

THERADS & FEEDS
LONGITUIONAL FEEDS	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5
CHOSS FEEDS	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75
MEATRIC THERADS	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15
WITHWOURTH THREADS IN TPI	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2
MODULER THERADS	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5
DIAMENTRAL PITCH THERADS	24 120 To 6	24 120 To 6	24 120 To 6	24 120 To 6	24 120 To 6	24 120 Tos 6
DIA OF LEAD SCREW	55 MM	60MM	60MM	60MM	60MM	60MM
PITCH OF LEAD SCREW	2TPI	2TPI	2TPI	2TPI	2TPI	2TPI