Specifications

1.full-automatic control system
2.Security can be ensure
Semi-automatic Rubber Fender Vulcanizing Tank

Overview  

1. Several group of heating tube be controled seprately, low energy consumption. 

2.  Equipment with blower at the end of tank, make heat distribut evenly, temperature can be controled precisely.

3. The pressure and temperature can be pre-setted and pre-adjusted.

4. Using high quality thermal insulation material,which can protect workers and avoid the waste of energy .

5. High temperature silicone seal is used by the vessel door, good seal. 

 

 

Application

 

Ordinary rubber product: Rubber shoes, rubber sheet, rubber convery belt, cable, tubber tube

Special rubber product: fender ,

 

 

 

 

 

FEATURES

 

1.Designoftank gate.Adopt manual quick open design, rapid, easy and safe.

 

2. High safety. Six sets of safety interlocks is adopted, includeautomatic pressure safety interlocking, pressure automatic control, manual safety, manual vent valve, high pressure alarm, automatic safety valve. Tank gate will not open as long as there have pressure inside of the chamber, remove potential safety hazard caused by mistake operation.

 

3. Inflatable seal. It can seal once close doorand the pot inflate, gate cannot open only when pressure reliefed totally, seal ring’s service life is more than 1 year, it wil not wear in this period.

 

4. Good heat preservation effect.Use aluminum silicate rock wool with steel plate support outside,which can ensure heat won’t volatilize and shape won’t transform, insulation effect can keep 10 years.

 

5.Automatic control: All main process can finished accurately by PLC control system, include heating process, heat preservation process, vulcanizing process, these process can realized just turn on the switch, which can save labor costs and ensure quality of product. 

 

     

 

 Descriptions in detail

1. The automatic control system and semi-automatic control system are adopt by vulcanization machine, which can designed according to different customs’ need. the PLC control systemcan

save more than 200 different processing technic, controlling the temperature, pressure and time accurately, so that achieve the desired effect. PLC control system can be equipped with a printer 

to print the temperature-time curve and pressure-time curve, the vulcanizing process can be more audio-visual and controllable.vulcanizing machine

 

 

2. Equipped with blower and windshield, making air blowing products indirectly, so as to the tank is easy to clean up. There is no dirty to pollute the rubber product which is processing, ensure the quality of the appearance of the 

 

product, the hot air evenly heating products at the same time, it is conducive to improve the quality of vulcanization vulcanizing machine

 

 

Technical parameters 

MOLD	CONTROL	DIA (mm)	LEN (mm)	MDM	PRE (Mpa)	TEM (°C)
DN1504B.3	Automatic	1500	4,000	Air	0.73~3.00	120~310
DN0206B.3		2000	6,000			120~310
DN0304B.3		3000	4,000			120~310
DN0410B.3		4000	10,000			120~310
DN0509B.3		5000	9,000			120~310
DN0610B.3		6000	10,000			120`310
1. TYPE: Electic heating , steam curing , circulation oil  2. MEDIUM : air, water ,steaming, circulation oil  3. CONTROL MANNERS : Manual ,semi-automatic and fully automatic  4. Diameter, length ,design pressure and temperature done under customers requirements .

 

 

Product picture  

Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank  Semi-automatic Rubber Fender Vulcanizing Tank