SHC-J High alumina ceramic tiles bonded wear&impact lining
It's a combination of high alumina ceramic vulcanized into rubber mat for a wear resistant surface, then bonded with a back steel plate. It contains the high wear resistance of alumina ceramic meanwhile withstands the high impact by the rubber mat and back steel plate. It's a very effective solution for application in high wear and impact, such as chutes, hoppers, silos on mines, power plants, cement plants, steel works and other heavy industry for bulk materials handling.
Optional material
Ceramic: SHC ceramic /SHN ceramic /SHA ceramic nano ceramic
Adhesive: ordinary rubber / heat resistant rubber (150℃) / cold resistant rubber (-50℃) / flame retardant rubber
Using temperature
-50℃ to 150℃
Applicable medium
Block materials such as coal, coke, slag, cement clinker, limestone and so on.
Application
It is suitable for low temperature bulk material conveying system, chute, and hopper, such as the coal falling pipe, coal hopper, vibrating screen.
Regular size
16/20/24/30/62mm
Super wear resistant
Extend the life of equipment more than 10 times;
Shandong SINHO will design and manufacture the custom-made products and provide tailor-made solution to every individual wear problem in specific conditions. It is very appriated to provide your equipment drawings and site condition features, so we will provide the most suitable anti abrasion and wear program for you.
The Technical Specifications
The performences | Unit | No. |
| Content of AL2O3 | % | ≥95% |
| Density | g/cm3 | 3.7 |
| Rockwell hardness | HRA | 88 |
| Rupturing toughness | MPa.m1/2 | 4 |
| Compression-resistant strength | MPa | ≥850 |
| Bend-resistant | MPa | 300 |
| Thermal conductivity |
W/m.K
| 24 |
Thermal expansion coefficient | 10-6 m/m.K | 5.0-8.3
|
