Cordierite ceramic bobbin heater core Heater Core IR Ceramic Heater Pipe

2)      Rated working temperature 1000 celsius degrees, the heating wire material will be Cr20Ni80 or 0Cr21Al6Nb, which surface working temperature can reach celsius 1200 degrees. The ceramic core can resist to heat of high temperature 1000 celsius degrees maximum, the support is Altitude Aluminum ceramic heating element.

3)      Rated working temperature 1000 celsius degrees, the heating wire material will be  1Cr25Ni20Si2 or 1Cr25Ni35Si2, which surface working temperature can reach celsius 1200 degrees. The ceramic core can resist to heat of high temperature 1000 celsius degrees maximum, the support is Altitude Aluminum ceramic heating element;

4)      Rated working temperature 1200 celsius degrees, the heating wire material will be  0Cr27Al7Mo2 or 0Cr21Al6Nb, which surface working temperature can reach celsius 1400 degrees. The ceramic core can resist to heat of high temperature 1250 celsius degrees maximum, the support is Altitude Aluminum ceramic heating element; .

Ceramic Bobbin Heater Advantage:

1)      Avoid to heat over the temperature and overload for long time

2)      When the furnace temperature higher than 400 degrees, avoid to be cold immediately.

3)      Unload and load the material without touching the ceramic heater

Caution:

4)      Pay attention to the red and blue buttons when the furnace on work, and change regularly when on thermal insulation

5)      Pay attention to the instrument meter, and deal with in time when the furnace temperature is not matched with the meter.

6)      The furnace Capacity over 100KW, it’ll be better to fix the ammeter for check in every heat area.

Protection:

1)      After using three to four months, take the ceramic heater, and dedust in the ceramic heater, and tuner the heater 180 degree.

2)      Pay attention to the positive and negative pole, and two to four months make a change.

3)      Can touch and hit the heater when take it out.

4)      Check the screw regularly for the oxidation looseness,Laiyuan.

   We are manufacture for Industry Heating Element several years .

2.Where is your factory located? How can I visit there?

   Our factory is located in Yancheng City, Jiangsu Province, China .

It takes 4.5 hours by bus ride from Shanghai .Warmly welcome to visit us freely .

3.What type of payment do you have available?

   A: TT and L/C

   B: West Union,Money gram and Aliexpress are available for sample order .

4.How can I get some samples?

   We are honored to offer you samples .

5.How does your factory do regarding quality control?

   Quality without compromise,Laiyuan people always attach great importance to quality controlling from the very beginning to the very end.

Welcome to contact us for more details ,most competitive price and reliable service for you !