Specifications

Ceramic Bobbin Heater With Coil:
1.High operation temperature
2.Size ,power is customized
3.High power/long working time

 

Ceramic Bobbin Heater With Coil Usage:

1)      Avoid to heat over the temperature and overload for long time

2)      When the furnace temperature higher than 400 degrees, avoid to be cold immediately.

3)      Unload and load the material can’t touch the ceramic heater

4)      Pay attention to the red and blue buttons when the furnace on work, and change regularly when on thermal insulation

5)      Pay attention to the instrument meter, and deal with in time when the furnace temperature is not matched with the meter.

6)      The furnace Capacity over 100KW, it’ll be better to fix the ammeter for check in every heat area.

Protection:

1)      After using three to four months, take the ceramic heater, and pour-out the dust in the ceramic heater, and tuner the heater 180 degree.

2)      Pay attention to the positive and negative pole, and two to four months make a change.

3)      Can touch and hit the heater when take it out.

4)      Check the screw regularly for the oxidation looseness,Laiyuan.

 

Description of Ceramic Bobbin Heater with Coil: 

 

1)      Rated working temperature 1000 degrees, the heating wire material is Cr20Ni80 or 0Cr21Al6Nb, the surface working temperature can reach 1200 degrees. The ceramic heater use this material the highest temperature can reach 1000 degrees, the support is Altitude Aluminum ceramic heating element.

2)      If with protection, it’s cold drawing seemless thin thickness stainless steel tube, the material is 1Cr25Ni20Si2 or 1Cr25Ni35Si2,this material has high temperature oxidation-resistance, carburization resistance and high temperature strength;

3)      Rated working temperature 1200 degrees, the heating wire material is 0Cr27Al7Mo2 or 0Cr21Al6Nb, the surface working temperature can reach 1400 degrees, the ceramic heater use this material the highest temperature can reach 1250 degrees, the support is corundum ceramic heating element.

 

If with protection, it’s cold drawing seemless thin thickness stainless steel tube, the material is Fe-Ni-Cr-Al-Re alloy, this material has super high-temperature oxidation-resistance, carburization resistance and high temperature strength; and woke on 1300 degrees for long time , anti-oxidation on 1360 degrees for short time .

  

 

 

The main technology and performance:

1.Range tolerance of cold resistance of electric wire ≤3%

2.Insulation resistance between outside protector and electric resistance >2MΩ

3.Diameter of heater tube is from φ60mm~φ300mm

4.Power is from 2KW to 24kw

5.Length of heater tube is from 800 to 2500mm

6.Thickness of s6eve is from 1.5 to 16mm

 

Our factory strictly locked the following several items in the process of production:

 

(1)Resistance material

The requirement for resistance is with high temperature resistance, no impurity, strong 

Antioxidant capacity. It can not deformation, breakdown, loophole when use.

2) Fire-resistance material

The requirement for fire-resistance material is aluminum ceramic, it has higher high temperature strength and high temperature insulation ability when use, and it can not break, electric leakage.

(3) Protection cover 

Our factory use OCr25Ni20Si2 ,when the cover works in partical, small deformation of the pipe,there is no effect for Heat element and stove working environment, strong high temperature resistance. Normal working time is 6000~10000hours, we are leader in domestic. 

 

Item	C	Si	Mn	P	S	Cr	Ni
1Cr25Ni20Si2		1.5-2.5	≤1.5	≤0.03	≤0.03	≥24.0	≥18.4

 

Order parameters:

1.Pls supply Drawing or sample, if no pls supply Size,type ,voltage,power,length,diameter etc related information of ceramic bobbin heater.

2.We also can supply drawing for our client reference according to the requirement.

 

 

 

 

 

1. Are you Manufacture or Trade Company?
We are manufacture for Industry Heating Element several years .

2.Where is your factory located? How can I visit there? 

Our factory is located in Yancheng City, Jiangsu Province, China .

It takes 4.5 hours by bus ride from Shanghai .Warmly welcome to visit us freely . 

3.What type of payment do you have available?
A: TT and L/C

B: West Union,Money gram and Aliexpress are available for sample order .

4.How can I get some samples?

We are honored to offer you samples . 

5.How does your factory do regarding quality control? 

Quality without compromise, Laiyuan people always attach great importance to quality controlling from the very beginning to the very end. 

 

 

Welcome to contact us for more details ,most competitive price for you !