Specifications
1.Material:Grey Iron2.Shape:1/8 bend:45 degree
3.Standard:ASTM A888
4.Cover:Common paint or epoxy paint
Advantages
1) strength and non-combustible
2) noise reduction
3) enviroment friendly, recyable
4) simple in design and install
5) lighter weight compared with sand-mould casting pipes and its
laying length increases 20-30% consequently.
Product List
Products list | |||||||||||
1 | M&F Long Sweep Bend | 290 | Beaded Plug | ||||||||
2 | Long Sweep Bend | 291 | Plain Plug | ||||||||
85 | Crossovers | 301 | Round Cap | ||||||||
90 | Elbow | 310 | Backnut | ||||||||
92 | M&F Elbow | 330 | Union,Flat Seat | ||||||||
95 | Union Elbow Flat Seat | 331 | M&F Union ,Flat Seat | ||||||||
97 | M&F Union Elbow Flat Seat | 340 | Union,Taper Seat | ||||||||
120 | 45° Elbow | 529 | M&F Socket | ||||||||
130 | Tee | 90R | Elbow Reducing | ||||||||
180 | Crosshead Female | 130R | Tee Reducing | ||||||||
270 | Entire Threads Socket | 240 | Socekt Reducing | ||||||||
270 | Part Threads socket | 241 | Bushing | ||||||||
280 | Hexagon Nipple | 245 | Nipple Reducing | ||||||||
Size | 1/2"-10" | Material | Gray Iron | ||||||||
Finishing | (Black) Painting, Galvanizing, Elctro-plating | ||||||||||
Type | Banded, Beaded , Plain | ||||||||||
Standard | ISO5922/IS049/ISO7-1 , BS EN1562:1997, DIN 2950/1692/2999 | ||||||||||
Mechanical Properties | Tensile Strength≥330MPA, Elongation rate≥8%, Hardness≤HB150 | ||||||||||
Mechanical Properties | C:2.4~2.9 Si:1.2~1.7 Mn:0.3~0.55P:0.12 S:0.18 Cr:0.09 | ||||||||||
Working pressure | Max 1.6MPA | Working temperature | Max 200°C | ||||||||
Producing Process | Pattern making - sand casting - heat treatment – galvanizing - threading - air pressure testing - packing | ||||||||||
Usage | Fro pipeline convey water ,oil ,gas and so on | ||||||||||
Testing | 100% Air pressure testing | ||||||||||
