Hot Sale Anaerobic System Uasb Reactor For Sewage Treatment
Product Description :
The basic principle of Upflow Anaerobic Sludge Bed(UASB): the main body of reactor can be divided into two areas, the upside and the underside, which are reaction zone and gas-liquid-solid 3-phase separation region respectively. The underside reaction zone is anaerobic sludge blanket with a good sedimentation performance. comes into the bottom of reactor by water distribution system, then flows up through anaerobic sludge blanket, which reacts thoroughly with anaerobic sludge, then organic are transformed into methane and carbon dioxide. Gas, liguid and solid are separated out by the upside 3-phase separator. The effluent waters COD removal rate can reach 80% above, volume loading is 510kgCOD/m3.d, the bio-gas separated can be used as energy source.
Anaerobic biological treatment makes use of anaerobes metabolic characteristic, in the condition of not supplying exogenous energy, taking reduced organic matters as , produce methane gas with an energy value. Anaerobic bio-treatment method is not only suitable for the treatment of high concentrated organic wastewater, but also applicable to low concentrated organic wastewater, such as urban sewage, whose influent water COD can be hundreds to tens of thousands mg/l.
In the circumstance of the whole society advocating circular economy, paying attention to resource recycling of industrial waste, is no doubt a good choice for sewage resource recycling.
Main advantages:
Anaerobic sludge concentration is high in UASB, average sludge concentration is 20-40gMLVSS/L.
Organic loading is high, hydraulic retention time is short. For example, when adopting mesophilic fermentation, volume loading is usually around 10kgCOD/m3.d.
No mixing agitator, the upstream movement of biogas generated during the fermentation process makes the upper sludge in the sludge bed stay in a suspension state; meantime, the underside sludge layer is also stirred in some extent.
Sludge bed doesnt need carrier, save cost and avoid blockage caused by stuffing material.
3-phase separator is set inside UASB, usually sedimenation tank is unnecessary. The sludge separated out by sedimentation area reflows into sludge bed reaction zone. Sludge reflow equipment is often not necessary either, operation power is small.
Product Show :
Other Products :
Shipment Show :
Certification :
Patent Certifications :
Laboratory :
Workshops Show :
Company Introduction :
Wuxi Mingzhou Environmental Protection Machinery&Equipment Factory is a well-known enterprise in water treatment industry.Located in Qianzhou industrial park,Huishan district, Wuxi city,Jiangsu province,it’s a provincial level high-tech enterprise on water treatment,integrating scientific research&development,production&sales,and technical service together. In 2000, we passed the certification of ISO9001: 2000 Quality Management System.
We have a rich experience in the production of water treatment equipment for about 30 years,which can be traced back to the year of 1978 when the first water purification equipment in China is development and manufactured through the common effort of our company and Shanghai 9th designing institute. After 30 years’ development, we have become a comprehensive environment protection enterprise on water treatment with design and production ability,combing purified water treatment,ultra-pure water treatment,waste water treatment and reuse water treatment together. At present,we have got dozens of patents through our independent research and development,undertaken thousands of projects,either big or small,and had a good cooperation with many well-known enterprises both at home and abroad, winning a good reputation among customers.
Our company covers an area of 1,200m2,among which housing construction area is 6,000m2,workshop area is 5,000m2.Our company contains 9 departments, which are comprehensive management department, sales department, foreign trade department,technical department,engineering department,purchasing department,production department,finance department as well as after-sale department.
Our service :
Adopting the principle of “innovative technology,excellent quality and best service”,we wish to cooperate with the public colleagues,make progress together and create a bright future for our nation’s environment protection cause !
FAQ:
1. Q: Are you a factory or a trading company ?
A: We are a factory, professional water treatment equipment manufacturer with over 30 years experience.
2. Q: Where is your factory located ? How can I visit there ?
A: Our factory is located in Huishan District, Wuxi City, Jiangsu Province, China, about 2 hours away from Shanghai. All our clients , from home or abroad, are warmly welcome to visit us.
3. Q: How to buy the idea products?
A: You can provide us your water sources, water quality, flow rate and ground ares (connect us for more details).
4. Q: How to pay ?
A:TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
5. Q: What is the delivery time ?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
6. Q: How to pack the products ?
A: We use standard package. If you have special package requirements, we will pack as required, but the fess will be paid by customers.
7. Q:How to install after the equipment arriving destination ?
A: We will provide details illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee,air tickets ,accommodation, wages will be paid by buyers.
8. Q: Have you received any certification?
A: Yes, We passed the certification of ISO9001:2008 Quality Management System and CE.
Welcome To Mingzhou ! Hope we can have a chance to cooperate!