Rotary cut mixing type aerator

   MP-XQ aerator has the following merits: has a good air distribution effect, oxygen utilization rate is high, flowrate in the tank is even, flow state is good, never blocks, short circuit wont happen, easy for installation.

Technical performance and parameters

A. specifications: 2580XH190             218XH190
B. air exhaust flow: 100-30                L/min/set
C. water depth: 4-8                       M
D. service area: 0.5-0.8                    M2/set
E. oxygen utilization rate: 21.5
F. oxygen transfer capacity: 0.165           Kg/h
G. resistance loss: <30Pa
H. material: ABS nylon

Application scope:

A. aeration tank in industrial and urban wastewater treatment plant, which uses blower as air source.

B. activated sludge method and contact oxidation method.

C. the technology renewal and reconstruction of existing old aerator.

Technology advantages:

1. adopt big holes to exhaust gas and lead flow, use several structures to cut and scatter airflow; its a modern and advanced aeration-diffusion method.

2. the equipment has characteristics of non-blocking and small air resistance, which can keeping producing air bubbles evenly and densely. Compared with micro-pore aerator, its efficiency wont deteriorate gradually.

3. the material adopted wont age easily, guarantee measures are complete, cleaning, replacing and repairing are not needed.

4. resitance loss is small, ≤30Pa.

5. aeration device often takes blower running at a low pressure to supply air, the smaller the resistance is, the higher the efficiency will be.