Interlocking PP Sports Court/pp Stadium
Negotiable /Square Meter
Min.Order:500 Square Meters
Interlocking PP Sport Court
Color full thickness. Excellent UV stability;
Modular design permits court portability;
Medium ball speed. Great for all skill levels;
Quick drainage and drying after rains;
Easy assembly and access to base for repairs;
Narrow gauge ribs for best traction;
Low abrasion on balls and shoes;
Court fastened around perimeter;
Trim tight to fencing under all conditions
Item | Width | Length | Thickness | Weight | MOQ |
Units | mm | mm | mm | kg | m2 |
No.1 | 300 | 300 | 13 | 0.42 | 100 |
No.2 | 250 | 250 | 13 | 0.22 | 100 |
Color:
Advantages:
A good sport and protection performance;
2, assembly design, easy installation and removal;
3, single chip to replace damaged, does not affect use;
4, rapid drainage, all-weather use;
5,100% recyclable, non-polluting, safe food grade material, non-toxic, tasteless, no heavy metals;
6,10 years long service life;
7, various colors, color can be set according to customer needs.
Accessories, installation tools and methods
Related accessories assembled flooring installation
Marking paint, thinner, textured paper, brush;
First, site preparation
Basics: available on the basis of solid, level foundation. Within three meters straightedge range error of not more than 5 mm.
1, first floor cleaned before installation.
2, the installation press site to locate a good line width bomb floor installation location (elastic line suggested talc, try not to use ink).
Second, the floor and the floor edge structure
Third, the bulk flooring installation
1, the starting point for the installation space left corner, left corner of the floor space as the apex angle A (as shown).
2, turn left to the right, the floor pin and clasp alignment, fixed fastened with a rubber mallet percussion (as shown).
3, floor side installation method
Side installation of the floor (note the direction of the floor and place the edge of the floor, the floor and the ears of the floor with a portion of the pin is connected to the side, some with one ear on the floor with a hole edge connected), the buckle side of the floor and floor with a rubber hammer pins are connected (as shown).
4, install the four corners of the floor
5, Installation Considerations
When installing floor pins and buckles must be aligned to avoid damage to the floor