Digitail Control Welding Mesh Machine

  JINLU welded mesh machine for roll or panel(Automatic Welding Mesh Machine), is the mechanical integration of the most advanced electronic and computer network welding equipment, the machine of the biggest advantages is the wire diameter adjustable weft pitch into the computer will be able to achieve what you get the pitch, mesh random variable. The mesh welding machine flat, diagonal error is very small, the welding network expert assessment is the most advanced welding equipment. If you need more than 2.5 m greater than the diameter 10MM devices and equipment can be pre-orders.

Basic technical parameters:

1.The machine width of 2.0 M

2.Welding diameter 2.5MM--6.0MM

3.The machine mesh Maximum length: 6m

4.The maximum number of welds: 45 beats / min

5.Welded minimum longitudinal reinforcement spacing: 30 mm

6.Welding minimum transverse reinforcement spacing: 30mm

7.Welding Material requirements: Q195F such as carbon content lower than the phase wires on the standard annealing

8.The number of solder joints: 67(first choice according to need autonomy)

9. Rated Power: 125kva × 7

10.This machine is widely used in railway fence, highway fence, bridge high-rise buildings, etc. mesh welding.

11.With cutting machine(can cutting mesh by automatic)

12.Mesh roll and panel all can make.

Cutting machine main parameters:

Power:3kw

Dimension:3.0mx1.5mx1.6m

Weight:1.1T

Machine components:

1. Host: including welded mesh body weft blanking parts

2 .Attached to machines: dragnet institutions

3. Auxiliary equipment: Straightening Machine

Machine photo: