Product Details

Specifications

refrigerator polyurethane foam
-cp/ip foaming agent
-good flowability
-low thermal conductivity

Products Introduction

Refrigerator polyurethane foam DJD-103 blend polyols use CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows

1.excellent flowability, the density of the foam is well-distributed, and the thermal conductivity is low

2.excellent low-temperature dimensional stability and good cohesiveness;

3. demould time is 4-8 minutes.

Physical Properties

Appearance

Hydroxyl Value mgKOH/g

Dynamic Viscosity (25 °C) mPa.s

Gravity (20 °C ) g/ml

Storage Temperature °C

Storage Stability month

pale yellow transparent viscous liquid

360-420

3000-4000

1.06-1.08

10-25

Recommended Ratio

pbw

DJD-103 blend polyols

CP or CP/IP

Isocyanate

100

12-14

136-142

Technology and Reactivity(the exact value varied depending on processing conditions)

Manual Mixing

Mechanical Foaming

Raw Material Temperature °C

Mould Temperature °C

CT s

GT s

TFT s

Free Density kg/m3

20-25

35-40

12-16

75-85

100-120

25-26

20-25

35-40

8-12

50-70

70-100

24-25

Foam Performances

Foam Density by Molding

Closed-cell Rate

Thermal Conductivity (15 °C)

Compressive strength

(perpendicular to the direction of rising)

Dimensional Stability (24h, -20 °C)

(24h, 100 °C)

GB/T 6343

GB/T 10799

GB/T 3399

GB/T 8813

GB/T 8811

≥35kg/m3

≥90%

≤22 mW/(m.K)

≥150kPa

≤0.5%

≤1.0%

The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.