Specifications

Hot-melted adhesive , designed for Edge-banding application
Good melting properties
High green strength

                                      

Hot Melt Adhesive for edge-banding(middle temperature)

 

APPLICATION  Wide area of application, for bonding all kinds of edgebands to particleboard and MDF.

 

PROPERTIES   No stringing

                       Good thermal stability

                       Good wetting properties

                       Long open time

                       High initial viscosity 

                       Good flow property

 

TECHNICAL    Viscosity            60000-90000CPS@180°C

DATA             Soft Point           85-94º C

                      Appearance          Light granule(with several colors)

                      Solid Content         100%

 

CONDITION    RY7530 should be used on any type of automatic edge banding machine.

                       Coating can be made either on the edge or on the section material.

                       The coated material is immediately placed in contact with the substrate and pressed with rolls.

                      Application temperature:  160-180°C

                     (The temperature should be checked directly in the gluing system)

                     Coating speed:   ≥5m/min

                     The supports and edges must be at ambient temperature(which should not be less than 15°C)

                     and the level of humidity should not exceed 10% in order to obtain a good bond.