Product Details

Specifications

can be made by your requirement,
100% virgin powder
long working life
Material: Tungsten Carbide
Certificate: ISO9001

can be made by your requirement

Fetures:

1.Very high wear resistance ,hardness
2.Long life,short delivery time
3.Can offer OEM
4.Best price
5.Free shipping

6. 100% virgin powder.

7. can drawing copper, iron, steel , and other metals.

8. Can offer both blank and finishing with casting.

---------------------------------------------------------------------------------------------------

Carbide drawing dies

Tungsten carbide drawing dies are used in wire drawing industries for drawing of different materials like Mild Steel (M.S), High Carbon (H.C), Stainless Steel (S.S), Brass, Aluminum, etc. All major wire producers use tungsten carbide drawing dies. We can supply different dies, such as drawing die, punching die, extrusion die, cold heading die, which are fully finished or rough cored - cased or uncased, to meet client’s exact requirements

----------------------------------------------------------------------------------------------------

.---------------------------------------------------------------------------------------------------------

Carbide grade for drawing dies

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than 6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than 20.00mm under more stress and also for drawing tubes of less than 10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.

1.Structure of dies:

The hole of the wire drawing dies is made up of four parts:

*Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.

*The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.

2. Material source:

The die materials imported from U.S.A. GE company. Each one has trade marks and certificate of company. Granularities are 351025.

3. The production and delivery will take 3-25 days.

4. Usage time: the whole set of dies can guarantee drawing 30000tons of copper wires. It can reduce the copper powder in the course of drawing. The surface of finished wires is smooth without any defect. After the dies drawing copper wires of 30000 tons, it will not be damaged, but it needs to safeguard, maintain, and polish.

Draing Dies Parameters(unit: mm)

Hole SizeΦd	Hole Size Tolerance	Ovality	Casing ΦD×H
Φ0.100~0.200	≤0.0015	≤0.0008	Φ25×8
Φ0.201~0.400	≤0.0020	≤0.0010	Φ25×8
Φ0.401~0.500	≤0.0025	≤0.0015	Φ30×10
Φ0.501~0.750	≤0.0030	≤0.0020	Φ30×10
Φ0.751~1.50	≤0.0035	≤0.0025	Φ37×12
Φ1.501~2.00	≤0.0050	≤0.0030	Φ37×12
Φ2.001~3.00	≤0.0070	≤0.0050	Φ41×20
Φ3.001~4.60	≤0.010	≤0.0080	Φ41×20
Φ4.601~8.00	≤0.015	≤0.012	Φ41×24