Tungsten carbide die for copper dies
USD $6 - $1,000 /Piece
Min.Order:1 Piece
Shenzhen Apple Vista Technology Ltd.
Tungsten carbide die for copper dies
We are producing carbide wire drawing dies, natrual diamond wire drawing dies, PCD wire drawing dies, CVD wire drawing dies, polycrystalline wire drawing die in a wide range of style and sizes ranging from 0.03-25mm, applicable for drawing copper wire, aluminum wire, steel wire, iron wire, tungsten wire, welding wire, etc.We welcome inquiries from buyers around the world.
----------------------------------------------------------------------------------------------------
1.Structure of dies:
The hole of the wire drawing dies is made up of four parts:
*Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.
*The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.
*Diameter fixed district: to guarantee the size and form accurate and even, lengthen the service life of the die.
*Wire outlet area: wire outlet terminal can prevent scuffing and break-up when the machine is stopped.
2. Material source:
The die materials imported from U.S.A. GE company. Each one has trade marks and certificate of company. Granularities are 351025.
3. The production and delivery will take 3-25 days.
4. Usage time: the whole set of dies can guarantee drawing 30000tons of copper wires. It can reduce the copper powder in the course of drawing. The surface of finished wires is smooth without any defect. After the dies drawing copper wires of 30000 tons, it will not be damaged, but it needs to safeguard, maintain, and polish.
Draing Dies Parameters(unit: mm)
Grade | Equivalent To ISO | Density (g/cm3) | HRA | T.R.S (Mpa) | Application |
YG3X | K05 | 14.9 | ≥91.5 | ≥1300 | For drawing non-ferrous metal wire and stainless steel wire etc. |
YG6 | K10 | 14.8 | ≥90.0 | ≥2150 | For drawing steel wire and stainless steel wire etc. |
YG6X |
K10 |
14.8 |
≥92.0 |
≥1860 | For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness.. |
YG8 | K20-K30 | 14.8 | ≥89.5 | ≥2320 | For drawing steel wire, stainless steel wire. Good general performance. |
YG11 |
14.4 |
≥88.5 |
≥2420 | For fabricating drawing dies of steel tubes and rods under high compreesibility ratio; punching, stamping, forging tools under large stress. |