Solar LED Inverter Manufacturers Pure Sine Wave Solar Inverter SKN-SS with Charge and Stabilizator(OEM,ISO,CE)
Negotiable /Piece
Min.Order:500 Pieces
Sako Electrical Group Co., Ltd.
Hot Sale High Quality Pure Sinewave Solar Inverter SKN-SS from 21 Years OLD BRAND "SAKO"
1.Input: 110V or 230VAC 50/60Hz
2.Output: 220VAC 50/60Hz
3.Power Factor 1
4.Pure Sine Wave
5.Suitable 7 Kinds of Battery Charging
SAKO SKN-SS SERIES HIGH FREQUENCY HOME INVERTER
-Micro Processsor Control
-Builing inside with solar controller
-Smart size design
-Full automatic and silent operation
-Automatic Line-to-Battery Switch over
-Three stage Intelligent Automatic Charging Mode Technology
-Remote control solution by RJ11 and remote panel
-Automatic charge while AC recovery(off model charging)
-High Efficient DC-to-AC conversion.minimizing energy loss
-Over load,short circuit protection Over charge , discharge protection
-Low battery and high protection
-Cool start
-Isolated output
-Compatibility with generators
-Full Multi-function LED Display with full meanings and buzzer alarms Design
-Application for Fan, light ,TV and office Appliances
-Intelligent Variable speed fan operation
-Battery type setup to get the best charge voltage and mode
Feature
Sine Wave Inverter/Charger System
The Desirable Long Backup Power Solution For Home And Office Appliances.
SAKO Solar Inverter Specification
| SKN-SS 1KW | SKN-SS 2KW | SKN-SS 3KW | SKN-SS 4KW | SKN-SS 5KW | SKN-SS 6KW | SKN-SS 8KVA | SKN-SS 10KVA | |||||||
SPECIFICATION | |||||||||||||||
DC INPUT | |||||||||||||||
Input Voltage(Vdc) | 12V/24V | 24V/48V | 48V/96V | ||||||||||||
Min DC start voltage(Vdc) | 10V/20V | 20V/40V | 48V/96V | ||||||||||||
AC Bypass | |||||||||||||||
Nominal Input Voltage | 110V or 230Vac(waveform:Sine or generator) | 230Vac(waveform:Sine or generator) | |||||||||||||
Input AC Range(Vac) | 90Vac±4%-135Vac±4% or 184Vac±4%-253Vac±4% | 184Vac±4%-253Vac±4% | |||||||||||||
Frequency Range(HZ) | 57Hz or 60Hz(47Hz -53Hz for 50Hz)-----{57Hz -63Hz for 60Hz} | ||||||||||||||
Input Frequency(Hz) | 50Hz/ 60Hz (Auto detection) | ||||||||||||||
Bypass Output Voltage(Vac) | same as input voltage | ||||||||||||||
Bypass Output Frequency(Hz) | same as input frequency | ||||||||||||||
Pass through without Battery | Yes | ||||||||||||||
Max Bypass Overload Current | 10A | 30A | 40A | 50A | |||||||||||
AC Efficiency | > 95% | ||||||||||||||
Transfer Time(ms) | 20ms (typical) | ||||||||||||||
Solar controller | |||||||||||||||
Solar controller | with 10A,20A,30A,40A,50A,80A 12V/24V/48V/96V/192V optional | ||||||||||||||
AC CHARGER | |||||||||||||||
Charge mode Input Voltage Range | 95~127Vac or 196~243Vac | 196~243Vac | |||||||||||||
Automatic Charge mode | Three stage charge mode Boost CC (constant current stage) → Boost CV (constant voltage stage) → Float (constant voltage stage) | ||||||||||||||
Nominal Charge Voltage | According to the battery type setup | ||||||||||||||
Charge Current(A) | 17.5A/35A/70A | 25A | |||||||||||||
Charge boost voltage(v) | According to the battery type setup( 12V BAT 14-15.5v 24V BAT 28-31V 48V BAT 56-62V 96V BAT 112-124V) | ||||||||||||||
Charge Floating Voltage(V) | According to the battery type setup (12V BAT 13.3-13.7, 24v BAT 26.6-27.6, 48V BAT 53.2-55.2V 96V BAT 106.4-110.4V) | ||||||||||||||
Over Charge Protection | Bat. V ≥15.7Vdc, beeps 0.5s every 1s & fault after 60s (15.7 for 12v, 31.4V for 24V, 62.8V for 48V, 125.6V for 96V) | ||||||||||||||
Charger Short Circuit Protection | Circuit breaker | ||||||||||||||
(INVERTER) | |||||||||||||||
Capacity(VA) | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | |||||||
Output Power(W) | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | 6400 | 8000 | |||||||
Power Factor(PF) | 1 | 0.8 | |||||||||||||
Output Voltage | 120VAC or 230VAC (Sine wave) | 230VAC (Sine wave) | |||||||||||||
Output Frequency | 50/60 ± 0.3Hz(auto tracking main first power connection) | ||||||||||||||
Wave | pure sine wave | ||||||||||||||
Inversion Efficiency | >88% | ||||||||||||||
Over load capacity | (110%<load<125%) ±10% Fault (shutdown output) after 15 minutes (125%<load<150%) ±10% Fault (shutdown output) after 60s Load>150% ±10% Fault (shutdown output) after 20s | ||||||||||||||
Low Battery Alarm | 10.5Vdc ± 0.3Vdc for 12V battery, 21.0Vdc ± 0.6Vdc for 24V battery, 42.0Vdc ± 1.2Vdc for 48V battery, 84.0Vdc ± 2.4Vdc for 96V battery | ||||||||||||||
Power saver | Load 25W (Enabled on “P/S auto” setting of Remote control) | no Function | |||||||||||||
AMBIENT | |||||||||||||||
Noise(dB) | 60dB max. | ||||||||||||||
Temperature | 0°C to 40°C | ||||||||||||||
Humidity | 5% to 95% | ||||||||||||||
Sea Level(m) | ≤1500 | ||||||||||||||
DIMENSION | |||||||||||||||
Product size L×W×H(mm) | L438mm*W184mm*H181mm | L608mm*W184mm*H181mm | L610mm*W230mm*H560mm | ||||||||||||
Packing size | L590mm*W312mm*H295mm | L808mm*W360mm*H352mm | L710mm*W330mm*H660mm | ||||||||||||
Weight(Kg) | 16.5/17.5 | 19/20 | 24/25 | 34/37 | 38.5/41.5 | 44.5/47.5 | 65.0/70.0 | 70.0/75.0 |
SAKO Solar Inverter More Pictures
SAKO Other Solar System