XQL-16 Single Blade Hydraulic Rubber Bale Cutter

1.Introduction of Vertical rubber cutter

This  Vertical Rubber cutting machine  is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials into gommures/pieces,which is convenient to mix;especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.

2.Features of  Vertical rubber cutter

1.This rubber bale cutter mainly consists of cutting knife,frame,cylinder,base,auxiliary table,sydraulic system and electric system.

2.The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife.

3.When cutting the raw rubber,put the raw rubber under the cutting knife,the press the start button,the knife can cut the rubber.

5.Two limited switches are installed on the frame to control the reversal valve to change the movement direction of the knife,at the same time,it protects the cover of the cylinder.

3.Main Technical Parameters of  Vertical rubber cutter

4.Picture of  Frame Type Plate Vulcanizer

5.Our service

 1.One year guarantee for whole machines

 2.24 hours technical support by email

 3.Calling or door - to -door service

 4.Provide videos for each machine

 5.We will send one engineer to your factory to guide installation and test running the production line, until you can operate the machine skilled

 6.Our workshop and factory

7.Our certificate

CE ISO9001 SGS

Welcome  to send inquiry and visit us to check the quality!