Product Details

Please feel free to contact with my viber: +86-18561530469, i will show you all the details.

Rubber Sheet Cooling Machine/rubber batch off

ing conditions:

1.applications:operating process on pressure, soak, cooling ,drying ad laminated.

2.equipment environment:high temperature 40°C,low temperature5°C;the highest relative humidity 95%

3.power source:AC380/50Hz,cooling water pressure:0.3~0.4 MPa;compressed air pressure:0.5~0.8MPa.

2.scope of supply:

1 taking in device 1p

2 pressed device 1p

3 longitudinal cutting device 1p

4 soak device 1p

5 clamp take up device 1p

6 wind cooling 1p

7 conveying laminated device 1p

8 air control device 1p

9 electric control system 1p

3.main technical specification:

Item/Model	XPG-600	XPG-800	XPG-900
Max.rubber sheet width(mm)	600	800	900
The thickness of the rubber sheet(mm)	4-10	4-10	6-12
Rubber sheeting temperature over room temperature after cooling(°c)	5	5	5
Linear speed of taking-in conveyer(m/min)	3-35	3-35	3-35
Linear speed of sheet hanging bar(m)	1-1.26	1-1.26	1-1.26
Hanging height of the sheet hanging bar(mm)	1000	1200	1400
Number of cooling fans(Set)	12-16	20-32	24-32
Total power(kw)	16	20-26	25-35
Overall dimension(mm)	1240021402820	(14850-18600)22202860	(18000-21750)23002980
About weight(t)	10	20	30

4.structure brief

1.take in device:

Used to take pressure in film ,according to cylinder controlled by fluctuation, operation convenience. taking in speed can be controlled by manual,it can be ascension

Take device adopts conveyor, the transmission system adopts frequency governor to control .

2.sSoak device:

Equipped with triplet,manual rotary valve and pressure cylinder,adjust pressed roll according to cylinder control through the manual rotary valve,in order to Make discontinuous film compressed together and the film continuous a slice.

3.Leaching plasma device:

Function : take over the film conveying equipment undertakes immersing, and carry on isolation agent.

Equipped with cooling water pipe,through the cooling water source,Continuous cooling liquid isolation, in order to control the temperature.

4.Clame take up device:

This device through the conveyor belt with isolation liquid film will be conveyed to the air cooling section gripping.

5.Wind cooling device:

constitute:it is made of frame ,cooling fans,hook rail and Hang lever conveyor. Cooling fan selection adopts 20 axial fan,satisfy the requirements of film cooling; Hang lever are installed on the taper pin . film in hang lever.

6. Conveying laminated device:Will the film into laminated measures, continuous fold in film seat

7.Air control part:

Take-in control,each cylinder pressure and in the action,control system adopts reliable performance with high quality products.

8. electrical control system

(1)All the wires controlled by PLC,it easy for operation ,reliable quality.

(2)The speed of production line can be through the inverter adjustment, make the film cooling line speed and host match.

(3)Fan control by the group control each motor are motor over-current protection circuit breaker, when a fault fan produced when the output signal of the fan, fault in all units and stop hair drier, just deal with a fault can be fan.