wireless charger pad , wireless charger receiver , Wireless Power Bank Charger

Name :wireless charging Emitter & pad

Input:5V 1.5A

Output :5V 800MA

Transmit Distance:<5MM

Effective Conversion Rate:80% or above

Specification :138*85*11MM

Features:

1. 1.    With function of wireless charge,compatible with Qi standard.
2. 2.    2 USB output port ,support 2 digital products charging the same time .
3. 3.    Cast off the yoke of the cable ,the charging of more efficient,more stable.
4. 4.    Small and portable ,it is necessaries when outside for tourism.

6. Package Includes:

   Attention: Dose not come with AC Adapter, you can use your cellphone adapter.
   1 x Wireless Charger Pad

   
   1 x USB Cable

    

   QI Standard Wireless Charger Charging Pad Plate For

   1.The wireless charger can be used for all Qi-abled device.

    

   2.Some mobiles phones must be eqquiped a Qi receiver to be charged wirelessly.

   The new portable Qi-abled wireless charger pad can be used for QI standard receiver.For Qi-marked devices,you just need to put them on the wireless charger pad,it will work well,and for some other without Qi mark,you need a wireless charge reciver for you phone.

    

   for iPhone:

   for iPhone 5/5S --- External(need to install the Qi receiver back case)

   for iPhone 4/4S --- External(need to install the Qi receiver back case)

   for Samsung:

   S3(9300/9308) --- External(reserved interface,need to install the Qi receiver)

   Note 2 (7100/7102) --- External(reserved interface,need to install the Qi receiver)

   Note 3 (9005/9006) --- External(reserved interface,need to install the Qi receiver)

   S4 --- External(reserved interface,need to install the Qi receiver)

   S5 --- External(reserved interface,need to install the Qi receiver)

   S6----Built –in

   S6 edge---Built-in

    

   for Nokia:

   920 --- Qi receiver built-in

   928 --- Qi receiver built-in

   925 --- External(reserved interface,need to install the Qi receiver)

   720 --- External(reserved interface,need to install the Qi receiver)

   820 --- Built-in(need to replace the battery cover)

    

   for HTC:

   Droid DNA --- Built-in

   Butterfly --- Built-in

   Inceredible 4G LTE --- Built-in

   8X --- Built-in

    

   for LG(google):

   Nexus 4 --- Built-in

   Nexus 5 --- Built-in

    

   for LG:

   D1L --- Built-in

   LTE2 --- Built-in

    

    

   Important Note:

    

   This Wireless Charger pad ONLY works with fully QI-ENABLE devices like Nexus 4/5, HTC Droid DNA/HTC 8X, Lumia 920,LG(G2/G Pro).

    

   Beucase this QI Charger pad DO NOT include SAMSUNG Tablet PC Samsung Galaxy S5/4/3,Note2/3,iPhone4/4S/5/5C/5S ,iPhone 4 4S 5 ipad mini ipad mini2 ipad 4 ipad air with a Receiver.This series need install the receiver.

    

    

Usage:

1. 1.    Put the micro-USB head in to the wireless emitter Micro-USB port ,connect USB port  to USB  adapter or USB deveice which with electricity.
2. 2.    Then the “POWER” LED will be lighted to work.
3. 3.    Put your cellphone ,which built-in Qi receiver or Qi technology upon the wireless charge .Move your cell phone up,down,left and right to match the wireless charge circle center.
4. 4.    While matchec ,the “link”LED will light ,your cell phone will be under charging ,
5. 5.    While charging,occurred interruption phenomenon,please check the ac adapter  O/P if it is DC 5V,>1A