Specifications

Single or multi-layered Door Press,PLC control, advantage of simple operation,convenient maintenance

• The main technical parameter of 1200T 4×8 feet single hot pressing (top cylinder)

   

  1, Total pressure: 1200KN

  2, Size of heating plate: 1400mm×2600mm

  3, Main cylinder diameter and quantity: 320mm×6

  4, Lift cylinder diameter and quantity: 63mm×4

  5, Max. working stroke: about 200mm

  6, Max. hydraulic system pressure: 24.9Mpa

  7, Power: 22kw+0.75kw

  8, Frequency: 380V/50HZ

   

   

   

  Be widely used for molding the MDF skins up-set cylinder keep the fast drop speed, shorter the board waiting time, improve the quality of skins.
• By using Synchronizer to make the mold close&open in same time.
• Additional guide system can reduce the friction of the mold , make the mold life longer and keep mold in good working position. 

 

Note :

1. Non-standard product which is made for the special requirement of subscriber is not listed.

2. If there is modification of the table ,we will inform by other means.

3. If the product you see is not the same with the pictures, the product will be regarded as standard.